JBL Control 25AV-LS Loudspeaker for Fire Alarm / Comm. Systems (Pair)

About: JBL Control 25AV-LS Loudspeaker for Fire Alarm / Comm. Systems (Pair)

The Control 25AV-LS is built on the same platform as our popular Control 25AV and is UL 1480 UUMW listed for use in fire alarm and/or emergency communication systems. The Control 25AV-LS utilizes a deep cabinet, high power components and complex network to achieve extremely smooth high fidelity performance from a compact 2-way loudspeaker. Premium performance capability and even coverage ensures excellent sound quality throughout the listening area.

A top-quality, low saturation transformer, enables the loudspeaker to be used on either 70 volt or 100 volt distributed speaker lines, with similar fidelity performance to the 8 ohm bypass position.

The patented InvisiBall. mounting method is simple to install, aims easily, and provides a high degree of theft deterrence. The cabinet accepts a variety of paints to match any d.cor. Weather resistance is maximized by utilizing an aluminum grille featuring polyester powder coating and liquid-tight MTC-PC2 terminal covers.

Coating the woofer cone in polypropylene and terminating its circumference in JBL’s WeatherEdge, a seamless, butyl rubber extension of the woofer surround, protects critical transducer elements. The polycarbonate tweeter diaphragm is reinforced with a thin film of titanium for added rigidity and endurance. Nickel/zinc rust-resistant terminals ensure a secure input connection.

Features

• UL 1480 UUMW Listed for Use in Fire Alarm and/or Emergency Communication Systems; EN54-24 certified
• EN 54-24 Compliant for Life Safety Applications
• Video shielded for use near video monitors.
• Extremely smooth frequency response.
• Aluminum Grille with Polyester Powder Coating for enduring reliability.
• 60 W transformer for 70 V or 100 V lines, with 8 ohms thru.
• SonicGuard overload protection.
• 130 mm (5.25 in) polypropylene coated woofer, 10 mm (.75 in) titanium coated horn-loaded tweeter.
• Includes InvisiBall mounting hardware and sealed input panel cover.
• Screw-down input terminals.
• 105° x 85° high frequency horn.

Specifications

• Frequency Range (-10dB) -  90 Hz - 20 kHz
• Power Rating -  200 Watts Continuous Program Power (at 8 ohm bypass mode) 100 Watts Continuous Pink Noise (at 8 ohm bypass mode) 60 Watts (at 60W tap setting)
• Transformer Taps -  60W, 30W, 15W (& 7.5W @ 70V)
• Sensitivity -  87dB, 1W at 1m (1kHz–10kHz, ave., at 8 ohm bypass mode); 71 dB, 1W at 4m per EN54-24 (100 Hz – 10 kHz, ave., 60W tap)
• Coverage Angle -  110°H x85°V
• Directivity Factor (Q) -  4.8 (500 Hz to 4kHz)
• Directivity Index (DI) -  6.5dB (500 Hz to 4kHz)
• Maximum SPL (1m) -  107 dB @ 1m (3.3 ft) average, 113 dB peak, at 8 ohms bypass mode, 89 dB at 4 m (13.2 ft.) average, at 60W tap setting, measured
• Drivers
  • 130mm (5.25 in) with polypropylene coated paper cone withWeatherEdge surround, 25 mm (1 in) voicecoil on kapton former
  • HF: 20mm (.75 in) titanium coated PEI
• Input Connectors -  Captive screw-down terminals, zinc-plated copper base, nickel plated metal screws/washers, accepts up to 9 mm outside 4 mm inside open lug, plus bare wire up to 12 AWG (2.5 mm)
• Enclosure -  ABS, (materials rated UL94-5VA)
• Grille -  Aluminum with polyester powder coating
• Outdoor Capability -  Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, IEC 529 IP-x5 splashproof rating
• Safety Agency -  UL1480-UUMW Listed (S7232), EN54-24:2008 certified (Certificate No. 0359-CPR-00245), NFPA90, NFPA70A, and in accordance with the requirements of IEC60849/EN60849
• Mounting Hardware -  InvisiBall aimable wall-mounting system included.
• Optional Accessories
  • MTC-25V for vertical columnar mounting of up to 3 speakers MTC-25/23H for horizontal splaying of 2 speakers
  • Three brackets array either 3 or 6 speakers in a hanging array module for 360° horizontal coverage
  • MTC-28/25CM to install speaker down from the ceiling
• Included Accessories 
  • 1 pc MTC-PC2 input panel cover
  • Invisiball mounting base
  • 6 mm x 100 mm Invisiball hex wrench
• Dimensions (HxWxD) -  9.3 x 7.4 x 6.3 inch (236 x 186 x 159 mm)
• Net Weight (each) -  8.4 lbs (3.8 kg)