Accessories
-
Telex C-9 Ear Cushion Leather Style for HR series
Replacement leather ear cushion for HR series headsets -
Sennheiser CABLE-II-8 Headset Cable - Unterminated
Straight copper cable with coiled segment to eliminate structure born noise. Reinforced with Aramid for improved durability. Unterminated ends, 2 m. Compatible with the HMD... -
HME DX Base Antenna
4.7” reverse TNC base station antenna. 50 ohm omnidirectional half-wave dipole. -
Telex BP-700 Alkaline Battery Pack
The BP-700 provides an easy solution to a replaceable alkaline battery holder for use with TR-800, TR-825, TR-700, TR-1, RKP-4, TR-80N and TR-82N beltpacks. -
Telex CMT-92 Telethin Straight Cord - Right Angle 1/8in Connector
The CMT-92 is a 5 foot long cord with a 1/8" (3.5mm) right angle connector for use with Telex earpieces -
Eartec Comstar Com-Center NiMH Battery
Replacement battery for Eartec COMSTAR Com-Center -
Hollyland Ethernet to Dual XLR Cable
MARS T1000 can be daisy-chained with SYSCOM 1000T or another 4-wire intercom system through a RJ45/Ethernet to XLR cable. Compatibility SYSCOM 1000T MARS 1000T -
Telex CMT-2 Telethin Straight Cord - 1/4in Connector
The CMT-2 is a 5 foot long, low luster gray cord with a 1/4" connector for use with Telex earpieces -
Clear-Com BP-MOUNT Beltpack Mounting Kit
Universal Beltpack Mounting Kit Use for Encore, HelixNet and FreeSpeak II beltpacks Able to hold tablets and beltpacks individually or at the same time Desk, screw or velcro strap... -
Eartec Scrambler SC1000 6-Port Charger
6-Port charger for Eartec Scramber SC-1000 Radios -
Telex MCP90-0 Flushmount Mic
The MCP-90-0 microphone is a phantom-powered "back-electret" miniature condenser flush microphone. The back-electret feature provides greater sensitivity, wider... -
Telex MCP-90-18 18in Electret Gooseneck Mic
Telex / RTS MCP-90-18 18" Gooseneck Microphone The MCP-90 series microphones are phantom-powered "back-electret" miniature condenser gooseneck microphones. The... -
Eartec UltraLite Lanyard
Lanyard fits UltraLITE™ Headset. Made of Nylon, Plastic, Aluminum -
Eartec UltraLite Off Ear Pad
Replacement Earpad for UltraLITE Single Off-Ear Side -
Hollyland SOLIDCOM C1 Hard-Shell Carry Case
Hollyland Solidcom C1 hard-shell storage case is designed for 9-person HUB version wireless intercom headset system and the included accessories. The Solidcom C1 headset carry... -
Sennheiser X3K1 XLR3 + 1/4in Headset Cable
Straight copper cable with coiled segment to eliminate structure born noise. Reinforced with Aramid for improved durability, and softer shield for greater flexibility. XLR-3... -
Studio Technologies Model 391 Dante Alerting Unit
The Model 391 Dante® Alerting Unit builds on the limited capabilities of the "beacon" or "strobe" devices that are ubiquitous with analog party-line (PL)... -
Clear-Com U-BOX-X3 3-Pin XLR Single Channel Surface Box
The U-Box is a highly versatile, robust enclosure to convert any Clear-Com KB 4-Gang sized speaker station into a desktop, shelf or wall mount unit for portable or permanent... -
Clear-Com CC-010 Replacement Tip
Ear Cushion for CC-010A Earset Single in-ear cushion only. Fits CC-010A earsets -
Pro Intercom Blazon 4 Beacon
Blazon 4 is triggered by the same voltage which lights the normal signal lamps in the intercom system. Whenever any signal lamp but ton on any station in the same circuit is... -
Clear-Com DX Headset Extension Cable
6 Foot DX Series (Mini DIN) extension cable -
Clear-Com U-BOX-X6 6-Pin XLR Dual Channel Surface Box
The U-Box is a highly versatile, robust enclosure to convert any Clear-Com KB 4-Gang sized speaker station into a desktop, shelf or wall mount unit for portable or permanent... -
Pro Intercom Wireless Intercom Hub
Create a system with one Master and up to 9 Remotes with an expansion Hub Required for networks of more than 4 users Expand your network up to 9 simultaneous... -
Clear-Com XLR4F to DX Headset Adapter Cable
Adapter Cable for using XLR4F terminated dynamic headset with DX Series intercom