RDL
-
RDL D-XLR2F Decora Wall Plate w/ Dual XLR 3-Pin Female Jacks
D Series products are user controls, indicators and connection plates that are compatible with Decora style mounting. D Series modules and jacks connect directly to a variety of... -
RDL TX-1A Balanced to Unbalanced Transformer - Adjustable
Features: Provides transformer isolation between balanced line and unbalanced input Level trimpot adjusts output 4 to 24 dB below input level Input may be 10 kΩ bridging or... -
RDL Bridging Input Transformer
Used to add transformer isolation to any line‑level RDL product input Frequency response: 20 Hz to 20 kHz (+/‑ 0.5 dB) THD: < 0.05% (1 kHz) 10... -
RDL TX-70A Speaker Level Input Interface
Features: Matches a 100, 70 or 25 volt speaker line to any unbalanced line-level audio input Trimmer adjusts output level for various input voltage/power levels Frequency... -
RDL PS-24KS 24 Vdc Switching Power Supply
Features: 24 Vdc Switching Power Supply North American AC Plug Energy Star Level VI DC Plug for Quick Connection to Numerous RDL Modules dc Plug May be Cut Off for Hard Wiring to... -
RDL EZ-UCB2 Under Counter Bracket
Under Counter Bracket Pair for all EZ Product Widths Features: Brackets Snap on EZ Case for Easy Alignment EZ Product Secures Quickly Using Two Screws Brackets Fasten to Underside... -
RDL D-XLR2M Decora Wall Plate w/ Dual XLR 3-Pin Male Jacks
D Series products are user controls, indicators and connection plates that are compatible with Decora style mounting. D Series modules and jacks connect directly to a variety of... -
RDL TX-LM2 Line Level to Microphone Level Transformer
Features: Matches balanced 600 Ω phone (or other line) into mic or line input Dual outputs:Unbalanced line-level and balanced mic-level Frequency response: 20 Hz to 20 kHz... -
RDL DS-XLR2 Decora Wall Plate w/ XLR 3-Pin Male & Female Jacks
D Series products are user controls, indicators and connection plates that are compatible with Decora style mounting. D Series modules and jacks connect directly to a variety of... -
RDL PS-24AS Power Supply for Interfaces
24 Vdc Switching Power Supply, North American AC Plug, 500 mA, dc Plug Features: 24 Vdc Switching Power Supply, CSA Approved Input 100 - 240v AC North American AC Plug Energy Star... -
RDL HD-RA2 Rack Adapter
Mounts 2 HD series products. Mixer amplifiers may be mounted forward for user control, or may be recessed securely behind a filler panel. -
RDL D-XLR3F XLR 3-pin Female Decora Wallplate
Features: All-Steel Construction Compatible with Decora®-Style Mounting Accessories Rear Panel Connections on Terminal Block Customizable Front-Panel Text -
RDL STD-10K Passive Audio Divider/Combiner
Each STD module is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output. This permits... -
RDL D-J1 Microphone Input Wall Plate
The D SERIES-J1 is a complete microphone input panel assembly. Connections to the female front‑panel XLR jack are made on a rear barrier block. Four terminals are provided: CASE... -
RDL D-RLC10K Remote Level Control
The RLC10K is the ideal companion to the RDL VCA modules where levels are to be controlled from a single remote location. It is designed to directly interface with the 3-wire... -
RDL STD-600 Passive Audio Divider/Combiner
Each STD module is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output. This permits... -
RDL DC-1W Chassis for Decora (White) - 1 Gang
The DC-1W desktop chassis holds one Decora®-style product, which includes RDL remote controls and connector plates. Installation is facilitated using the included mounting... -
RDL MB-3 Kit to Mount ST, TX Series Modules on FP Panel
TX or STICK-ON Module fastens to MB-3 which slides into FP-RRA/H track. Included: RDL MB-3 Mounting Bracket Assembly Hardware ** Track not included -
RDL FP-CT1 Locking Cable Tie Bracket for FP-RRA and FP-RRAH
The FP-CT1 is a mounting bracket that fits the mounting track on FP-RRA and FP-RRAH rack mount panels. The set screw allows the installer to secure the bracket into position. An...