Penn-Elcom
-
Penn-Elcom Lift Off 2 Pc Hinge
Life-Off Hinge Material: Steel Finish: Zinc -
Penn-Elcom Piano Hinge
37mm / 1.46" Open Hinge, 1.83m / 72" Length Punched 50.8mm / 2" Centres Material: Steel Finish: Zinc -
Penn-Elcom Amp Cabinet Corner C1823K - Black
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Black -
Penn-Elcom FT01-Q 1U Rack Fan Unit
The NEW version of the 1U/6U blower unit for use in 19" equipment racks now comes with low noise fans to reduce noise levels from the rack. The quiet fans make it ideal for... -
Penn-Elcom CoolRaC 1U Hot Air Extraction Unit
This is a very quiet 1U Hot Air Extraction Unit, which uses 3 miniature blowers to expel heat from any 19” equipment racks. Behind the 1U Escutcheon, the ergonomic 0.5U... -
Penn-Elcom Large Surface Mount Twist Latch.
Large Surface Mount Twist Latch. Spring-Loaded. Material: Steel Finish: Zinc -
Penn-Elcom Amp Cabinet Corner C1824N - Nickel
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Nickel -
Penn-Elcom Braked Swivel Castor - Blue
0mm / 3.15" Castor with Rubber Blue Wheel Carrying Weight per Wheel 80Kg / 176.37Lb Works With Castor Release Plates W0093/NB and W8980 Material: Steel/Rubber -
Penn-Elcom Rubber Feet Small Tapered Foot
Small Tapered Rubber Foot with Steel Washer. Non-Marking. Washer Design Helps Eliminate Over-Tightening. Material: Rubber/Steel -
Penn-Elcom Medium Offset Latch In Plain Dish
Medium Latch in Plain Dish Material: 1.2mm / 18 gauge Steel Finish: Zinc -
Penn-Elcom Blue Braked Caster - 440lb Rating
Braked Swivel Castor with 100mm / 3.94" Blue Wheel . 27mm / 1" Wide Tyres Carrying Weight per Wheel: 200kg / 440Lb Works with Castor Plate W0094 and universal wheel... -
Penn-Elcom D2101K Blank Dish Black 5x7
Blank Dish in Black. 5" x 7" Constructed of 1.2 mm/0.047" thick steel. -
Penn-Elcom Strut Hinge
Small Strut Hinge Material: Steel Finish: Nickel -
Penn-Elcom Amp Cabinet Corner C1824K - Black
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Black -
Penn-Elcom Small Briefcase Rubber Foot
Diameter: 17.5mm / 11/16" Height: 10mm / 3/8" Small Briefcase Rubber Foot Material: Black Rubber -
Penn-Elcom Sprung Surface Handle w/ 19mm / 3/4" Grip
Sprung Surface Handle, with 19mm / 3/4" Grip. Works with Backplate H1078/BP Material: 1.6mm / 16 gauge Steel Finish: PennBrite -
Penn-Elcom Amp Cabinet Corner C1823N - Nickel
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Nickel -
Penn-Elcom Mini Latch in Shallow Plain Dish
Mini Latch in Shallow Plain Dish From Split to Hole Centre: 11mm / 7/16" Material: 1.2mm / 18 gauge Steel Finish: Zinc -
Penn-Elcom Red HD Caster - 700lb rating (with grease fittings)
100mm / 3.94" Heavy Duty Castor. Roller Bearing. "Cold Forged" Top Plate and Base. Hardened Double Ball Bearing Swivel Raceways. NSF Certified. Zerk Fitting in... -
Penn-Elcom Low Mount Latch in Plain or Offset Dish
Low Mount allows you to Hook the Latch on the Edge of the Dish to avoid damage to the latch when open. Material: 1.2mm / 18 gauge steel Finish: PennBrite -
Penn-Elcom Medium Non-Offset Latch In Plain Dish
Medium Latch in Plain Dish Material: 1.2mm / 18 gauge Steel Finish: Zinc -
Penn-Elcom Medium Duty Draw Bolt Lockable Latch
Medium Duty Draw Bolt Lockable Latch Material: Steel Finish: Nickel -
Penn-Elcom Rivet Protected Recessed Handle with Extended Grip
Rivet Protected Recessed Handle with Extended Grip - Double Sprung 150Kg / 330.69Lb carrying capacity. Suits H1905 and H1065/BP Backplate Material: Steel Finish: Pennbrite -
Penn-Elcom Rivet Protected Recessed Handle 5/8 DISH 3/4" GRIP
Rivet Protected Recessed Handle - Double Sprung Material: 1.2mm / 18 gauge Stee Finish: PennBrite