xVision Theatrixx DMX/RDM Splitter/Isolator 1:8 + thru. 1RU - XLR3

About: xVision Theatrixx DMX/RDM Splitter/Isolator 1:8 + thru. 1RU - XLR3

The DMX/RDM splitter is a high quality, rugged distribution device for your DMX-512 and RDM signals.

Available in both traditional 1RU, 8 channel form factor, or as a modular, 3 channel unit compatible with Theatrixx’s Award-Winning 8-Bay Reversible Converter System, the product opens up interesting possibilities for high-universe count, high density configurations. For maximal compatibility, the device is offered with a choice of 3-pin or 5-pin XLR connectors.

The input and each output are optically isolated up to 1000 volts, ensuring line failures are contained and do not take down the whole network. RDM data is forwarded to each port, and a special “Timing Safe Mode” bypasses RDM transmissing and boosts the DMX signal quality to ensure compatibility with older-generation fixtures. It is also a handy troubleshooting feature that can be easily switched on or off at the push of a button.

Features

• Compatible with DMX-512A (RDM) and DMX-512 (1990).
• Comprehensive protection against severe electrical faults on DMX lines.
• Switchable DMX Termination on input.
• Timing-safe mode filters and retimes incoming signal.
• Fully isolated input and output ports.
• Multi-function LED status indicator for each port.
• Available both as a standalone rack-mountable device or as part of the xVision Reversive Converter modular system.

Specifications

• Inputs/Outputs
  • Input - 3-pin XLR male
  • Loop-Thru - 1 x 3-pin XLR female
  • Isolated Outputs - 8 x 3-pin XLR female
• Supported Signals
  • DMX Termination - Switchable on/off
  • RDM Support - Yes
  • RDM Bypass - Switchable on/off
  • Port Isolation Voltage - Up to 1kV
  • Timinig Safe Mode - 33 FPS, 512 Slots, 88us Break, 44 us MAB
• Environnemental Specifications
  • Relative humidity - 0% to 90% RH non-condensing
  • Operating temperature - 0-40 °C
• Power Requirements
  • Power Supply
    • Built-in power supply
    • PowerCon with loop thru
  • Power Consumption - 15W
  • Voltage Range - 100-240V, 50-60Hz
• Physical
  • Height - 43.43 mm (1.7 in) – 1 RU
  • Depth - 178 mm (7 in)
  • Width - 482.6 mm (19 in)
  • Weight - 3.75 kg (8.25 lbs)

What's in the Box

• Theatrixx DMX/RDM splitter/isolator 1:8 + thru. 1RU XLR3
• AC Mains to PowerCON True1 cable (1.5m, specify plug type at ordering, extra power cable on request)