Dimmers & Power Switches
-
Chauvet DJ DMX-4 LED Dimmer/Relay Pack
It’s a 4-channel dimmer/relay pack providing DMX control for on/off or dimming to units not equipped with DMX on their own. The fixture is optimized for use with small LED... -
ADJ DP-DMX-20L 4 Channel DMX Dimmer/Switch
ADJ's DP-DMX20L is a 4 channel portable and universal DMX dimmer/switch pack. Each channel can individually be set to dim or switch and the pack can function as a one, two or... -
ADJ Uni Pak II DMX Dimmer
A well produced light show required exact timing and finesse when it comes to light levels and presentation. Luckily the Uni Pak II from ADJ exists to make your dimming and on/off... -
ADJ LED Dummy
Product: LED DUMMY FEATURES . High performance load device designed for LED fixtures . Designed for triac control circuits . Plugs inline to the output of power... -
ADJ DP-415R 4x 500W DMX Dimmer Pack
The ADJ DP-415R is a compact, portable 4-channel DMX dimmer/switch pack that has eight 3-prong 15 Amp Edison socket (2 for each channel) allowing you to be able to control... -
ENTTEC CVC4 Constant Voltage LED Driver w/ DMX and Plink
The CVC4 is the next evolution of the ENTTEC LED dimmer, building upon the the CVC3 and DIN-LED4PX. Think of the CVC4 as a higher power version of these popular models, with the... -
Astera AX1 PixelTube Wall Charger
Replacement charger for AX1. 48V, 0.5A; AC to DC converter with 1m cable. -
Astera FP1-PWB-CAB-15 Titan Extension Cable 15 Meter (8-Pack)
Set of 8 cables (15m) for Titan Tube Powerbox for charging and data connection. -
Astera FP1-PWB-CAB-10 Titan Extension Cable 10 Meter (8-Pack)
Set of 8 cables (10m) for Titan Tube Powerbox for charging and data connection. -
Astera FP1-PWB-CAB-5 Titan Extension Cable 5 Meter (8-Pack)
Set of 8 cables (5m) for Titan Tube Powerbox for charging and data connection. -
Ape Labs 2-Way PSU Splitter
2-Way PSU Splitter for charging multiple fixtures off a single PSU -
Obsidian Control NETRON RP2 2-way DMX Power Relay
The NETRON RP2 is an intelligent 2-way DMX Power Relay that is an ideal tool to protect fixtures from damage, lower power consumption, and reducing the overall wear and tear of... -
Ape Labs USB to DC Charger
USB to DC Charger for Cans & Minis. Charge (1) Mini or (1) Can -
Ape Labs 3-Way PSU Splitter
3-Way PSU Splitter for charging multiple fixtures off a single PSU -
Elation Uni Bar - 1 ch. Dimmer - 10 amps max
• 3-pin XLR DMX IN/OUT ports • Serves as a Switch or Dimmer Pack depending upon the set operating mode • USITT Standard DMX512 • 4 digits Segment Display shows... -
ENTTEC OCTO MKII 16-Universe DIN-RAIL LED Pixel Controller
Referred to as the ‘ OCTO Mk2 ,’ the OCTO is a powerful dual-output eDMX to LED pixel converter with overdrive mode transmitting up to 16-Universes. Robust and... -
Eliminator ED15 4-Channel Dimmer
Take control of your light show with Eliminator’s ED-15 . Its unique 4-channel dimmer pack is designed to control your light fixtures movement. This 15-amp controller... -
ENTTEC PLink Injector - 5V
The PLink Injector converts PLink data from your Pixelator or Pixelator Mini, to allow you to easily control pixel tape or pixel dots from long distances. Available for 5V, 12V or... -
ENTTEC PLink Injector - 12V-24V
The PLink Injector has been engineered to work as part of an ENTTEC Pixelator series set up to make it fast, easy and affordable for you to control LED pixel strips or pixel dots... -
Ape Labs PSU Charger
The Ape Labs PSU Power Supply will Charge and/or Power any of the following Ape Labs Fixtures: Can Mini Stick Maxi W-App W-Ape The Ape Labs Single PSU splitting capabilities are... -
Ape Labs 4-Way PSU Splitter
4-Way PSU Splitter for charging multiple fixtures off a single PSU -
Ape Labs Super PSU Charger
The Ape Labs Super PSU splitting capabilities are dependent on the fixture. Maxi - Up to (6) can be charged - (2) 3-Way splitter can be used Stick - Up to (8) can be charged - (2)... -
Ape Labs 6-Way PSU Splitter
6-Way PSU Splitter for charging multiple Cans or Minis off a single PSU -
ENTTEC CCC4 Constant Current 4-Channel LED Dimmer
ENTTEC’s CCC4 is a 4-channel, auto-addressable constant current (CC) LED dimmer designed to dim compatible constant current fixtures up to 1A per channel at 12-24V by...