Clamps & Safety Cables
-
The Light Source Mega-Combo Wrench (Blue)
Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. -
The Light Source TC Clamp - Black
The TC Clamp will fasten from 2" OD to 1.5" OD tube. The TC Clamp has a 2-1/2" T-handle so no tools are required to fasten to the pipe. 1.25″ ×... -
The Light Source Mega-Coupler - Black
The Mega-Coupler has a 1/2″ × 1 1/4" Hex Head Bolt with The Light Source Wing Nut. Our Mega-Coupler has solid nut tabs that won’t break off. It uses... -
The Light Source Purlin Clamp 1/2in Bolt
The Purlin Clamp is perfect for installing almost anything to bar joists, purlins and I-beams up to 1" thick. A 1/2"-13 × 2.5″ fully threaded square head set... -
The Light Source Mega-Combo Wrench (Black)
Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. -
The Light Source Mega-Clamp C-Clamp - Black w/ 2 Inch Long Bolt
The Mega-Clamp is the world’s new standard theatrical lighting C-Clamp. The Mega-Clamp is created from high tensile, aircraft grade, extruded aluminum; so it’s both... -
The Light Source Mega-Combo Wrench (Silver)
Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. -
The Light Source Uni-Bolt for Strut Channels
Uni-Bolt for fastening fixtures or pipes to strut Channel. Insert the Uni-Bolt into standard 1-5/8 inch by 1-5/8" strut channel, rotate 90 degrees and spin the 2"... -
The Light Source Coupler w/Eye Nut - Black
he Mega-Coupler w/Eye Nut has a Forged Steel Eye Nut for making rigging connections from a pipe or truss. The Forged Eye Nut is secured to the Mega-Coupler with a 1/2"... -
The Light Source Mega-Clamp C-Clamp - Black w/ 2.5 Inch Long Bolt
The Mega-Clamp is the world’s new standard theatrical lighting C-Clamp. The Mega-Clamp is created from high tensile, aircraft grade, extruded aluminum; so it’s both... -
The Light Source Versi-Clamp - Black
The Versi-Clamp wraps around the entire range of standard truss, from 2" OD down to 1" OD, all without marring the truss. The unique 2 position latch on the link saves... -
The Light Source TC Clamp - Silver
The TC Clamp will fasten from 2" OD to 1.5" OD tube. The TC Clamp has a 2-1/2" T-handle so no tools are required to fasten to the pipe. 1.25″ ×... -
The Light Source Mini-Claw - Black
Lightweight profile for hanging small lighting fixtures to truss or pipes. Holds the weight of the fixture for you while you secure it. No set screw to ding truss. Fits from... -
The Light Source MP.5B.5M 1/2in Pipe to 1/2in Bolt Adapter
This adapter allows you to use readily available 1/2" steel water pipe to make custom length hanging adapters. The square shape allows you to tighten these to the pipe with a... -
Staff Choice
The Light Source Mega-Clamp C-Clamp - Black
The Mega-Clamp is the world’s new standard theatrical lighting C-Clamp. The Mega-Clamp is created from high tensile, aircraft grade, extruded aluminum, so it’s both... -
The Light Source Mega-Coupler - Silver
The Mega-Coupler has a 1/2″ × 1 1/4" Hex Head Bolt with The Light Source Wing Nut. Our Mega-Coupler has solid nut tabs that won’t break off. It uses... -
The Light Source Mega Slim Coupler with 3/8" Flat Head Bolt - Black
The Mega Slim Coupler is a lower profile option for smaller light fixtures. It is half the size of our standard Mega-Coupler and weighs 30% less; yet fits the same as the... -
The Light Source Mini-Clamp - Black Anodized
The Mini-Clamp is perfect for PAR 38’s, Pin Spots, and other small fixtures. The clamp is made from an aircraft grade aluminum extrusion with micro-grooves that conform to... -
The Light Source Mega-Coupler, Swivel - Black
The Swivel Coupler will fasten from 1-1/4" pipe (1.660" OD) to 2.050" OD truss tube. The Swivel-Coupler has wide wing nuts for fastening the clamp to the pipe or... -
The Light Source Purlin Clamp 3/8in Bolt
The Purlin Clamp is perfect for installing almost anything to bar joists, purlins and I-beams up to 1" thick. The Purlin Clamp is available with 3/8"-16 tpi fasteners.... -
The Light Source Mega-Clamp C-Clamp - Black w/ 5/16-18 Bottom Bolt
The Mega-Clamp is the world’s new standard theatrical lighting C-Clamp. The Mega-Clamp is created from high tensile, aircraft grade, extruded aluminum; so it’s both... -
The Light Source Mega-Airwall Hanger (7 Inch)
The Mega Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega Airwall Hanger engages the airwall track the... -
The Light Source Mega-Coupler - Black w/ Steel Wingnut
The Mega-Coupler has a 1/2″ × 1 1/4" Hex Head Bolt with The Light Source Wing Nut. Our Mega-Coupler has solid nut tabs that won’t break off. It uses... -
The Light Source Mega-Claw - Black
The new standard for hanging intelligent lighting fixtures. Allows one man to hang intelligent fixtures. Simply flip the link up, place clamp over the pipe and the Mega-Claw holds...