Audio Technica AT-LP3xBT Fully Automatic Wireless Belt-Drive Turntable - White

About: Audio Technica AT-LP3xBT Fully Automatic Wireless Belt-Drive Turntable - White

The AT-LP3XBT turntable combines 60 years of high-fidelity design with convenient Bluetooth® technology, giving you all the benefits of vinyl with the freedom to connect to the latest Bluetooth® speakers or headphones.

The successor model of the previous AT-LP3 comes with beneficial upgrades, such as wireless compatibility with the high-quality Qualcomm® aptX Adaptive audio and Qualcomm® aptX™ audio codecs, the AT-VM95C cartridge, which is compatible with any of Audio-Technica‘s VM95 Series replacement styli, detachable RCA output cables, and the external AC adapter, which handles the AC/DC conversion outside of the chassis, reducing noise in the signal chain.

Features

• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX Adaptive audio and Qualcomm® aptX™ audio codecs
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• External AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable
• Available in black (AT-LP3XBT-BK) and white (AT-LP3XBT-WH)

Specifications

• Communication Specifications
  • Communication System -  Bluetooth version 5.2
  • RF Output -  2.5 mW EIRP
  • Maximum Communication Range -  Line of sight - approx. 10 m (33')
  • Frequency Band -  2.402 GHz to 2.480 GHz
  • Modulation Method -  GFSK, Pi/4DQPSK, 8DPSK
  • Compatible Bluetooth Profiles -  A2DP
  • Supported Codecs -  Qualcomm® aptXTM Adaptive audio, Qualcomm® aptXTM audio, SBC
• Turntable Specifications
  • Type -  Belt-drive, fully automatic operation
  • Motor -  DC motor
  • Drive Method -  Belt drive
  • Speeds -  33-1/3 RPM, 45 RPM
  • Turntable Platter -  Die-cast aluminum
  • Wow and Flutter -  < 0.2 % WRMS (33 RPM) at 3 kHz
  • Signal-to-Noise Ratio -  > 60 dB
  • Output Level
    • PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
    • LINE: 252 mV nominal at 1 kHz, 5 cm/sec
  • Phono Pre-Amp Gain -  36 dB nominal, RIAA equalized
• Tonearm Specifications
  • Type -  Static balanced straight tonearm
  • Effective Length -  221.5 mm
  • Overhang -  19 mm
  • Maximum Tracking Error Angle -  Less than 3.0°
  • Stylus Pressure Adjustment Range -  1 to 4 g
  • Applicable Cartridge Weight Range (including headshell) -  14.5 to 20 g
• Cartridge and Headshell Specifications
  • Cartridge Model -  AT-VM95C
  • Cartridge Type -  VM
  • Recommended Load Impedance -  47,000 ohms
  • Output Voltage -  4.0 mV (1kHz, 5cm/sec)
  • Stylus -  0.6 mil bonded conical
  • Cantilever -  Aluminum pipe
  • Tracking Force Range -  1.8 to 2.2 g (standard 2.0 g)
  • Cartridge Weight -  6.1g (0.22 oz)
  • Headshell Model -  AT-HS3BK
  • Headshell Weight
    • 11.1 g (including lead wires)
    • 10.3g (excluding lead wires)
  • Headshell Overhang Adjustment -  ±8 mm
• General Specifications
  • Power Supply Requirements -  100-240 V, 50Hz/60Hz, 0.6 A Max.
  • Power Consumption -  2 W
  • AC Adapter -  12 V, 0.5 A
  • Dimensions -  435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
  • Weight -  5.0 kg (11 lbs)

Accessories Included

• Dust cover
• Felt mat
• Platter (with drive belt)
• Counterweight
• Headshell (AT-HS3BK) with VM stereo cartridge (AT-VM95C)
• 45 RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))