BenQ LU895UST 5000 ANSI Lumen WUXGA Laser Simulation Projector

About: BenQ LU895UST 5000 ANSI Lumen WUXGA Laser Simulation Projector

• 0.25 ultra short throw ratio for large image from short distance.
• One-click preset configurations to prepare multi-projectors for blending.
• IP6X sealed engine with optional filter for optimal dust resistance and protection.
• Supports firmware updates via LAN to keep all devices up to date without physical access.
• Laser high visual 5000 ANSI lumen brightness

Immersive Projection - Built for Space-Limited Immersive Projects

• 0.25 Ultra Short Throw
• 500lm High brightness
• 117% Low Offset
• Blending Ready Mode
  • *Preset configuration. Automatic edge  blending software not included. Additional  software or hardware is required to complete edge blending.
• 360° Installation
• BenQ White Balance Adjustment
• Dustproofing
• Remote Device

Installer Ready - Fast, Consistent Setup and Deployment

• Blending Ready Mode: One-click preset in the OSD that applies key settings to prepare images for multi-projector blending.
  • *Preset configuration. Automatic edge blending software not included. Additional software or hardware is required to complete edge blending.
• BenQ WBA for Seamless Multi-Projector White Calibration: BenQ’s factory white balance adjustment (WBA) reduce variables between images projected from different projectors, significantly reducing manual calibration effort. It can save up to a full day of setup time in large-scale installations while ensuring seamless multi-projector alignment for edge blending.

Dust Protection and Easy Maintenance

1. IP6X Sealed Engine Design: Shields the projector’s optical engine from dust intrusion, ensuring long-term stability and reliable performance.
2. Optional Filter for Extra Protection: Provides added protection for easier daily maintenance and helps extend projector life.
3. Auto Reset Mechanism: Automatically tracks filter usage and resets the timer when a new filter is installed, without any manual setup.

IT Takes Control Streamlined Device Management

• Remote Monitoring and Diagnostics: Easily track projector status and diagnose issues remotely, eliminating frequent on-site visits.
• Firmware Management Over Network: Easily update all projectors via LAN to keep firmware current without physical access.
• Reliable Performance, Less Maintenance: Ensure long-term stability, freeing SI teams to focus on creative installations rather than routine upkeep.

Specifications

• Display
  • Brightness (ANSI lumens): 5000
  • Resolution: WUXGA (1920x1200)
  • Native Aspect Ratio: 16:10
  • Contrast Ratio (FOFO): 3,000,000:1
  • Display Color: 30-bit (1.07 billion colors)
  • Light Source: Laser
  • Light Source Life: a. Normal 20000 hrs, b. ECO 30000 hrs
• Optical
  • Throw Ratio: 0.253
  • Zoom Ratio: Fixed
  • Lens: 'F 2.44, f: 3.7 mm
  • Projection Offset (Full-Height): 117%
  • Keystone Adjustment: 2D, Vertical ± 15 degrees; Horizontal ± 14 degrees
• Picture
  • Rec. 709 Coverage: 93%
  • Picture Modes: Simulation, 3D, Bright, HDR10, HLG, Presentation, sRGB, User 1, User 2, Vivid
• Compatibility
  • Input Lag: 16.7 ms (1080P 60Hz)
  • Resolution Support: VGA (640 x 480) to 4K UHD (3840 x 2160)
  • Horizontal Frequency: 15K~135KHz
  • Vertical Scan Rate: 23~120Hz
• I/O Interface
  • HDMI in: (x2), HDMI-1 (2.0b/HDCP2.2), HDMI-2 (2.0b/HDCP2.2)
  • LAN (RJ45): (x1)
  • 3D Sync out: (x1)
  • USB Type A: (x2)
  • USB Type Mini B: (x1)
  • RS232 in (DB-9pin): (x1)
• Audio
  • Speaker: (x1), 10W
  • Audio out (3.5mm Mini Jack): (x1)
• Environment
  • Operating Temperature: 0~40℃
  • Power Supply: AC 100 to 240 V, 50/60 Hz
  • Typical Power Consumption (110V): TBD
  • Stand-by Power Consumption: <0.5W
  • Network Stand-by Power Consumption: <2W
  • Acoustic Noise (Typ./Eco.)(dB): 34/30
• Projection System: DLP
• Dimensions (WxHXD): 12.87 x 12.93 x 5.18 inch (327 x 328.3 x 131.6 mm)
• Weight: 9.92 lbs + 0.22 lbs (4.55 Kg+/- 100g)

What's Included

• Remote Control w/ Battery
• Power Cord
• Quick Start Guide
• Warranty Card