Savage C-Stand with Grip Arm Kit - Black

About: Savage C-Stand with Grip Arm Kit - Black

The Savage Black Coated Stainless Steel C-Stand with Grip Arm Kit is a full suite production solution! A patented junior receiver on the lowest leg gives this stand a leg up from the competition. This feature allows users to place a second light or modifier low to the ground, and position the stand into a corner for optimal output in compact spaces. Do more with less gear in the way!

An included 20″ (51cm) riser with junior to baby pin stores away along the side of the main riser when not in use, and can be mounted into the leg’s junior receiver for double action. Mount two lights or one light and a scrim onto both risers to get maximum use from one C-stand. Remove the junior to baby pin from the secondary riser and drop into the leg junior receiver for ultra-low positioning. Transfer either riser from the center to the leg junior receiver to move a light snugly into a corner. Adjust the secondary riser through the foot of the lowest leg to level the stand on stairs or uneven surfaces.

This two riser stand is a heavy-duty stainless steel support that can secure up to a 25 lb. (11.33kg) load (more than the competition!) and handle rugged usage in the studio or on location. A satin black finish over the durable and rust-proof stainless steel material reduces reflectivity on set. Fast-acting, foldable legs on a turtle base open/close and lock easily with a pull of the release knob. Stand includes an adjustable hook for hanging cables and controllers (when mounted high on the column) or sandbags and ballasts (when mounted low) and can fold up alongside the riser when not in use.

Included in this C-stand kit is a 40″ (102cm) stainless steel grip arm with an aluminum gobo head and our unique gobo clamp to more easily secure reflectors, scrims, flags and other accessories. The jaws of the gobo head can be clamped onto a variety of different objects from 8mm to 35mm wide.

Enjoy the convenience of a Rocky Mountain leg and turtle base in one stand.

Includes:

• Removable black coated stainless steel turtle base
• Black coated stainless steel 3-section riser – 40″ (102cm) and 20″ (51cm) sizes available
• 20″ (51cm) Black coated stainless steel riser
• Junior to baby pin
• 40″ (102cm) Black coated stainless steel grip arm
• Black coated aluminum gobo head
• Black coated aluminum gobo clamp
• Removable hanging hook

Sandbags (not included) are highly recommended for use with this stand when mounting heavy objects.

Specifications:

• Anti-rust stainless steel
• Black satin finish reduces reflectivity
• Removable turtle base
• Junior receiver on leg allows for either included risers to be placed snug in a corner, or for low placement of a second light or modifier (patented feature!)
• Leg leveler for uneven surfaces or stairs
• Pull release knob locks legs into open or closed position
• Dual baby pin mount possibilities
• 8mm – 35mm Gobo head clamping range
• Gobo head clamps lined with EPDM rubber to prevent damage on thin walled tubes
• Blue padded handle for comfortable grip

40" (102cm) Size:

• Maximum load: 25 lbs. (11.3kg)
• Minimum working height: 53" (135cm)
• Maximum working height: 114" (290cm)
• Footprint: 25" (64cm)
• Collapsed leg width: 22" (56cm)
• Total weight: 24 lbs. (10.9kg)