Lighting Accessories
-
Astera BrickBase Plate
Set up PixelBrick lights on the floor or on a truss with the BrickBase Floor Stand with Integrated BrickMount by Astera. With the brick mount you can set an Astera PixelBrick on... -
Astera AX1 WingPlate Screw (set of 10)
Astera AX1 WingPlate Screw (set of 10) -
Astera Yokebase for PlutoFresnel (set of 2)
Replacement YokeBase to attach Yoke to PlutoFresnel. Contains 2 YokeBase. -
Astera Barndoor for QuikSpot
All the good things of traditional rotatory 8-way barndoors without the inconveniences of extra wires or poor quality. The Barndoors for QuikSpot are all about shaping accuracy,... -
Astera BarnDoors for QuikPunch
As easy to operate as always, this 8-way barndoor benefits from the QuikPunch’s Fresnel-based accurate beam performance, even when QuikTurn’s zoom is not at flood... -
Astera AX3 Rubber Feet (set of 10)
Astera AX3 Rubber Feet (set of 10) -
Astera LunaShade with Blocker
Designed to control the beam in your practicals, the LunaBulb with Blocker is James Friend’s innovative solution to block LunaBulb’s incidence on actors, props or... -
Astera Flood Filter (32°) for AX5
Astera offers a variety of beam-modifying filters. When inserted into the AX5 they can widen the beam angle to 30° or turn it into an elliptical beam for wall washing. The... -
Astera LunaSnoot Bulb
No glare – just control: add LunaSnoot to the LunaReflector to avoid any stray light disturbances on viewer’s eyes or in the camera’s lens. Its snap-on attaching... -
Astera Power Station Bridge Cable (set of 8)
Use the Astera Bridge Cable, offered here as a pack of eight, to connect up to eight Astera PowerStations and NYX bulbs for easy configuration. -
Astera Power Station DC Split Cable
This 8-way Astera PowerStation DC Split Cable connects to a single 24 VDC power supply to eight PowerStations, which then can connect to eight NYX bulbs via eight bridge... -
Astera Rabbit-Rounder Adapter
Adapter to attach universal Rabbit-Rounder modifiers from DOP Choice to LeoFresnel -
Astera AX3 Bracket Assembly
Astera AX3 Bracket Assembly for LightDrop -
Astera ConnectorPlate for HydraPanel
The Astera Connector Plate is specifically designed to mount two FP6 HydraPanels together for increased brightness. This dedicated bracket is made of aluminum and features two... -
Astera Yoke for QuikPunch
Astera Yoke for QuikPunch fixtures. Specifications Weight: 500 g / 1.102 lbs Dimensions (L x W x D): 210 mm x 232.8 mm x 50.4 mm / 8.27" x 9.17" x 1.98"... -
Astera Gobo Holder for ProjectionLens for PlutFfresnel
These Gobo Holders (4-pack) from Astera are compatible with the separately available AF80-PLS Projection Lens for the AF80 Pluto Fresnel. These gobo holders... -
Astera LunaReflector Bulb
Create a punchier and narrower beam by quickly attaching the LunaReflector to the LunaBulb in its slim look. Thanks to the inner reflective surface, LunaReflector is essential for... -
Astera AX2 Adjustable Foot
Astera AX2 Adjustable Foot for PixelBar -
Astera LunaLens Bulb
The best fit for a spotlight look in your LunaBulb. Easily attachable to the LunaReflector, the LunaLens softens the light output while keeping the traditional narrow beam angle... -
Astera LunaShade with Diffusor
What if you could not only dim and define the color nuances in your practicals, but also decide which specific areas should be softened? That’s the exact purpose of... -
Astera Kit of 4 Gobos for ProjectionLens for PlutoFresnel
This 4-pack Gobo Kit from Astera is designed for use with the separately available AF80-PLS Projection Lens that works with the AF80 Pluto Fresnel. The four... -
Astera Eggcrate 40 for HydraPanel
- Astera Eggcrate 40 for HydraPanel -
Astera FP3 AC Distribution Cable for Hyperion Charging Case
Astera FP3 AC Distribution Cable for Hyperion Charging Case for Hyperion Charging Case -
Astera Adapter Disk for AX3
- The Astera Adapter Disk for AX3 is used to insert the light into an AX5 dome to create a light ball.