Clamps & Accessories
-
Matthews MICROgrip Rod - 8in
8" MICROgrip 1/4-20 Male to 1/4-20 Female Rod -
Matthews MICROgrip Rod - 20in
20" MICROgrip 1/4-20 Male to 1/4-20 Female Rod -
Matthews Clip with 1/4in Thread
Use this handy clip to hold just about anything -
Matthews Ear for 1-1/4in Pipe
Ear for 1-1/4" Pipe -
Matthews Hollywood Arm 40in - Black
40” Stainless Steel Arm - Black Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for... -
Matthews Infinity Arm Tip 3/8-16 Male Thread
The industry standard for attaching and accessorizing larger cameras, monitors, lights, camera cages, and many other industry accessories. The bigger brother to the... -
Matthews Infinity Arm Tip 1/4-20 Male Thread
The industry standard for attaching smaller cameras like DSLRs, mirrorless cameras as well as smaller monitors, lights, cages and many other industry accessories. The most... -
Matthews 1/4in to 5/8in Adapter Pin
5/8" Baby Pin to 1/4-20 Male Adapter -
Matthews Hollywood Arm 20in - Stainless
20” Stainless Steel Arm Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for fast,... -
Lowel 2.5" Grip Head for C-Stand - Chrome
Lowel’s Grip Head (CGH-25) provides 5/8 and 3/8-inch holes for mounting grip arms and other lighting fixtures or grip equipment. Product Specifications Mounting... -
Matthews Sand Bag Cordura Black - 15lbs
Sandbags are used whenever you need extra weight to prevent tipping. You usually "bag" stands, especially when the weight is off center, such as with a heavy Scrim. They... -
Matthews Vice Grip Plier with two 5/8in Pins
The Locking Pliers also provides maximum gripping power on both flat and round surfaces with smaller diameters. EXTREME CAUTION must be taken when the 5/8" pin provided on... -
Matthews MICROgrip Rod - 6in
6" MICROgrip 1/4-20 Male to 1/4-20 Female Rod -
Camvate 1/4-20 to 3/8-16 Male Double-Ended Spigot (4-Pack)
It is an essential accessory for mounting on super clamps or any piece of grip gear. The adapter has a 1/4"-20 screw at one end and a 3/8"-16 screw at the... -
Matthews Telescoping Hanger Extension - 2ft - 6ft
Telescoping Hangers have a very substantial pipe clamp to attach to a lighting grid. The pipe clamp has been slightly offset to allow the riser or drop down tube to slide up when... -
ADJ 44.5mm L-Track Narrow Adapter w/ Clamp for ElectraPix Series
The 44.5mm L-Track Narrow Clamp adapter , meticulously engineered for seamless integration with ElectraPix Series products, delivering unmatched versatility and reliability in... -
The Light Source Maffer Pin Adapter
1/2"-13 TPI threads on a hex Maffer stud for fastening light fixture to maffer clamp 1" Belleville washer and Nylock nut included. -
Chauvet Pro Narrow Half Coupler for 2in Truss - Black
Black anodized narrow clamp with threaded M12 bolt. 1,650 lb (750 kg) load capacity. Fits 2 inch (50 mm) truss. Specifications Color: Black anodized Threaded Bolt: M12 Load... -
Matthews Cotone Mount Moving Light Stand Adapter
The Moving Light Stand Adapter “Cotone Mount” is a game-changing solution for live production setups, allowing you to mount industry “Mover Lights” to... -
The Light Source Mega-Junior Pin Receiver with Slim Claw - Black
The Mega-Junior Pin Receiver is a great way to hang your film and studio light fixtures! Fits the standard 1-1/8" spuds commonly used for light stands and allows you to... -
Chauvet Pro Narrow Half Coupler for 2in Truss - Aluminum
Aluminum anodized narrow clamp with threaded M12 bolt. 1,650 lb (750 kg) load capacity. Fits 2 inch (50 mm) truss. Specifications Color: Natural aluminum, clear anodized ... -
Chauvet Pro Lockable Swivel Coupler for 2in Truss
Aluminum anodized swivel coupler clamp. 1,650 lb (750 kg) load capacity. Fits 2 inch (50 mm) truss. Specifications Color: Natural aluminum, clear anodized Load capacity: 1,650... -
Chauvet Pro Full Size Half Coupler for 2in Truss - Black
Black anodized clamp with threaded M12 bolt. 1,650 lb (750 kg) load capacity. Fits 2 inch (50 mm) truss. Specifications Color: Black anodized Threaded Bolt: M12 Load capacity:... -
ADJ 70.1mm L-Track Clamp Adapter for ElectraPix Series
The 70.1mm L-Track clamp adapter , specifically tailored for seamless integration with the ElectraPix Series products, offering unparalleled versatility and reliability in...