Clamps & Accessories
-
Kupo KD-CF16P Ceiling Clip with 5/8 Baby Receiver
Ceiling clips - also known as drop ceiling hangars. These clever devices are baby studs with a scissors-clip attached, and can slip or clip onto the metal strips that... -
Matthews Backdrop Ears - 1.25in Pipe
DON'T FIGHT THE KNOB! Saves time and eliminates aggravation of fighting with the stand or grip head. No more battling your stand and frame and...no more wrinkles! The offset... -
Matthews Extendellini
The Extendellini is a 12" extension for a Matthellini or Cardellini center jaw clamp -
Matthews MicroGrip Head - 1.25in
Matthews Grip Heads are the strongest in the business! Set it and forget it...plates feature two holes of 3/8" and 5/8" diameter that eliminate any confusion. New... -
Kupo Baby 5/8in (16mm) Stud for 3 + 4 Way Clamp
This baby 5/8" (16mm) stud quickly attaches to any of the mounting locations on either the 3 Way Clamp or 4 Way Clamp to accept any light fixture or accessory with a baby... -
Kupo 1/4in Male To 1/4in Female Screw Adapter
This adapter features a 13mm long 1/4” stud on top and a 1/4” female thread underneath. The stud is designed for attaching the mounting bracket to the bottom of a... -
Matthews MICROGrip Base
The MICROgrip Base is a 2 lbs base for use with table top shooting. The 4" base has a non-abrasive pad on the bottom to protect the surface. Pair the base with MICROgrip rods... -
Chauvet Pro Full Size Half Coupler for 2in Truss - Aluminum
Aluminum anodized clamp with threaded M12 bolt. 1,650 lb (750 kg) load capacity. Fits 2 inch (50 mm) truss. Specifications Color: Natural aluminum, clear anodized Threaded Bolt:... -
Kupo Hex Camera Stud 3/8in-16 Male
This is a stud with a hexagonal adapter on one side to be mounted into a Convi or Super Viser Clamp and a round Baby 5/8" (16m) adapter on the other with a 3/8"-16 male... -
Kupo Camera T Marker - Black
Traditionally tape is used on the floor to indicate where the talent is supposed to stand. This works but does leave tape on the ground and can damage the surface such as trying... -
Kupo Counter Weight - 8.8lbs / 4kg
Constructed from heavy duty painted iron, Kupo counter weight is designed to work with a boom to balance heavier lighting rigs. Featuring a locking clamp that makes it easy to be... -
Matthews C-Clamp with 2x 5/8 Baby Pins - 8in
Matthews C Clamps are available in 4", 6", 8", 10" and 12" with or without 5/8" mounting pins or Junior Receivers. Each clamp has a steel channel... -
Matthews Pipe Spreader
Used in both vertical and horizontal positions, a pipe spreader is placed at both ends of a 1 1/4" diameter pipe. The two piece system is simply one receptacle for the pipe... -
Matthews Hollywood Arm 20in - Black
20” Stainless Steel Arm - Black Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for... -
Kupo Hex Camera Stud 1/4in-20 Male
This is a stud with a hexagonal adapter on one side to be mounted into a Convi or Super Viser Clamp and a round Baby 5/8" (16m) adapter on the other with a 1/4"-20 male... -
Matthews The BabySitt'r Mini (2 Pack)
Securely and quickly mount baby plates to the BabySitt'r in seconds, without tools or screws. A universal system that works with any standard baby plate, from most known... -
Matthews Dutti Dolly Universal Stand Bracket
Stand Brackets for Dutti Dolly track -
Matthews Shot Bag - 5lbs
Matthews uses steel shot instead of lead to fill these black cordura bags. Stainless steel and custom shot bags are also available -
Matthews Rock n Roller Combo Wheel (Set of 3)
Why did we name our new accessory wheel family the Rock n' Roller?™ Do they rock? Yes! But they also roll smoothly over rocks, power cables, cable... -
Chauvet Pro Heavy Duty C-Clamp for 2in Truss
Black anodized clamp. 550 lb (250 kg) load capacity. Fits 2 inch (50 mm) truss. Specifications Color: Black anodized Load capacity: 550 lb (250 kg) Fits: 2 inch (50 mm) truss ... -
Matthews Baby Pin to 17mm Adapter
Converts 5/8" male to 17mm female. Also, by reversing the position of the set screw and the T-Handle, can be semi-permanently attached to any snap-in accessory (i.e.... -
Matthews 6in Pin with Collar
Small and easy to keep in that emergency kit, the 6" Pin with Collar can be mounted in a Grip Head, without fear of it slipping through the hole when a light fixture is... -
Matthews Infinity Arm 5/8in Baby Pin
Use this tip to mount lights with bale blocks, mount in a grip head, or with anything that has a 5/8" female receiver. -
Matthews Hollywood Arm 20in Grip Head - Stainless
20” Grip Head, Stainless Steel Arm Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow...