Clamps & Accessories
-
Kupo 1/4in-20 D-Ring Screws (Set of 5)
The Kupo 1/4"-20 D-Ring Screws (Set of 5) is made with stainless steel. It can be hand tightened using the hinged D-ring or by using a screw driver. It's great for... -
Kupo Baby 5/8in (16mm) Stud for 3 + 4 Way Clamps
This baby 5/8" (16mm) stud quickly attaches to any of the mounting locations on either the 3 Way Clamp or 4 Way Clamp to accept any light fixture or accessory with a Baby... -
Matthews Apple Box - Half Mini 10x12x4
Use them for propping or leveling, sitting or standing. Nail Wall Plates to them to hold low angle lighting fixtures and multiple other purposes. A Full Apple Box is equivalent to... -
Matthews MicroGrip Head - 1.25in
Matthews Grip Heads are the strongest in the business! Set it and forget it...plates feature two holes of 3/8" and 5/8" diameter that eliminate any confusion. New... -
Kupo Super Knuckle Ball with 1/4in-20 Male Thread
CNC aluminum ball ( Dia. 26mm) with black anodized finish. The round plate offers extra support and stability for cameras. The male 1/4"-20 threaded steel stud matches most... -
Chauvet Pro Heavy Duty C-Clamp for 2in Truss
Black anodized clamp. 550 lb (250 kg) load capacity. Fits 2 inch (50 mm) truss. Specifications Color: Black anodized Load capacity: 550 lb (250 kg) Fits: 2 inch (50 mm) truss ... -
Kupo Super Convi Clamp Double Socket
This is an additional socket for the Super Convi Clamp. It offers an additional 5/8" (16mm) socket. It comes in a black finish. Gravity casting Offer an additional... -
Kupo Stand Leg Protector (Set of 3) - Blue
This clever elastic stand leg protector set with embroidered Kupo logos is designed to protect the floor or surface under the stand and also helps guard against impacts. Made of... -
Matthews Backdrop Ears - 1.25in Pipe
DON'T FIGHT THE KNOB! Saves time and eliminates aggravation of fighting with the stand or grip head. No more battling your stand and frame and...no more wrinkles! The offset... -
Matthews Gaffer Grip with 5/8 Pins
Mount small light fixtures virtually anywhere with this handy adjustable jaw clamp which clamps objects up to 3 3/4". Your surfaces stay protected with 12 rubber gripper pads... -
Matthews Extendellini
The Extendellini is a 12" extension for a Matthellini or Cardellini center jaw clamp -
Kupo 1/4in Male To 1/4in Female Screw Adapter
This adapter features a 13mm long 1/4” stud on top and a 1/4” female thread underneath. The stud is designed for attaching the mounting bracket to the bottom of a... -
Kupo Baby 5/8in (16mm) Stud for 3 + 4 Way Clamp
This baby 5/8" (16mm) stud quickly attaches to any of the mounting locations on either the 3 Way Clamp or 4 Way Clamp to accept any light fixture or accessory with a baby... -
Kupo KD-CF16P Ceiling Clip with 5/8 Baby Receiver
Ceiling clips - also known as drop ceiling hangars. These clever devices are baby studs with a scissors-clip attached, and can slip or clip onto the metal strips that... -
Matthews MICROGrip Base
The MICROgrip Base is a 2 lbs base for use with table top shooting. The 4" base has a non-abrasive pad on the bottom to protect the surface. Pair the base with MICROgrip rods... -
Kupo Hex Camera Stud 3/8in-16 Male
This is a stud with a hexagonal adapter on one side to be mounted into a Convi or Super Viser Clamp and a round Baby 5/8" (16m) adapter on the other with a 3/8"-16 male... -
Kupo Camera T Marker - Black
Traditionally tape is used on the floor to indicate where the talent is supposed to stand. This works but does leave tape on the ground and can damage the surface such as trying... -
Kupo Counter Weight - 8.8lbs / 4kg
Constructed from heavy duty painted iron, Kupo counter weight is designed to work with a boom to balance heavier lighting rigs. Featuring a locking clamp that makes it easy to be... -
Matthews C-Clamp with 2x 5/8 Baby Pins - 8in
Matthews C Clamps are available in 4", 6", 8", 10" and 12" with or without 5/8" mounting pins or Junior Receivers. Each clamp has a steel channel... -
Matthews Hollywood Arm 20in - Black
20” Stainless Steel Arm - Black Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for... -
Matthews The BabySitt'r Mini (2 Pack)
Securely and quickly mount baby plates to the BabySitt'r in seconds, without tools or screws. A universal system that works with any standard baby plate, from most known... -
Matthews Dutti Dolly Universal Stand Bracket
Stand Brackets for Dutti Dolly track -
Matthews Pipe Spreader
Used in both vertical and horizontal positions, a pipe spreader is placed at both ends of a 1 1/4" diameter pipe. The two piece system is simply one receptacle for the pipe... -
Kupo Hex Camera Stud 1/4in-20 Male
This is a stud with a hexagonal adapter on one side to be mounted into a Convi or Super Viser Clamp and a round Baby 5/8" (16m) adapter on the other with a 1/4"-20 male...