Clamps & Accessories
-
Kupo Super Convi Clamp Double Socket
This is an additional socket for the Super Convi Clamp. It offers an additional 5/8" (16mm) socket. It comes in a black finish. Gravity casting Offer an additional... -
Matthews Gaffer Grip with 5/8 Pins
Mount small light fixtures virtually anywhere with this handy adjustable jaw clamp which clamps objects up to 3 3/4". Your surfaces stay protected with 12 rubber gripper pads... -
Matthews Apple Box - Half Mini 10x12x4
Use them for propping or leveling, sitting or standing. Nail Wall Plates to them to hold low angle lighting fixtures and multiple other purposes. A Full Apple Box is equivalent to... -
Matthews Backdrop Ears - 1.25in Pipe
DON'T FIGHT THE KNOB! Saves time and eliminates aggravation of fighting with the stand or grip head. No more battling your stand and frame and...no more wrinkles! The offset... -
Chauvet Pro Heavy Duty C-Clamp for 2in Truss
Black anodized clamp. 550 lb (250 kg) load capacity. Fits 2 inch (50 mm) truss. Specifications Color: Black anodized Load capacity: 550 lb (250 kg) Fits: 2 inch (50 mm) truss ... -
Kupo 1/4in Male To 1/4in Female Screw Adapter
This adapter features a 13mm long 1/4” stud on top and a 1/4” female thread underneath. The stud is designed for attaching the mounting bracket to the bottom of a... -
Kupo KD-CF16P Ceiling Clip with 5/8 Baby Receiver
Ceiling clips - also known as drop ceiling hangars. These clever devices are baby studs with a scissors-clip attached, and can slip or clip onto the metal strips that... -
Matthews Extendellini
The Extendellini is a 12" extension for a Matthellini or Cardellini center jaw clamp -
Kupo Baby 5/8in (16mm) Stud for 3 + 4 Way Clamp
This baby 5/8" (16mm) stud quickly attaches to any of the mounting locations on either the 3 Way Clamp or 4 Way Clamp to accept any light fixture or accessory with a baby... -
Matthews MICROGrip Base
The MICROgrip Base is a 2 lbs base for use with table top shooting. The 4" base has a non-abrasive pad on the bottom to protect the surface. Pair the base with MICROgrip rods... -
Kupo Hex Camera Stud 3/8in-16 Male
This is a stud with a hexagonal adapter on one side to be mounted into a Convi or Super Viser Clamp and a round Baby 5/8" (16m) adapter on the other with a 3/8"-16 male... -
Kupo Camera T Marker - Black
Traditionally tape is used on the floor to indicate where the talent is supposed to stand. This works but does leave tape on the ground and can damage the surface such as trying... -
Kupo Counter Weight - 8.8lbs / 4kg
Constructed from heavy duty painted iron, Kupo counter weight is designed to work with a boom to balance heavier lighting rigs. Featuring a locking clamp that makes it easy to be... -
Matthews C-Clamp with 2x 5/8 Baby Pins - 8in
Matthews C Clamps are available in 4", 6", 8", 10" and 12" with or without 5/8" mounting pins or Junior Receivers. Each clamp has a steel channel... -
Matthews Hollywood Arm 20in - Black
20” Stainless Steel Arm - Black Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for... -
Matthews The BabySitt'r Mini (2 Pack)
Securely and quickly mount baby plates to the BabySitt'r in seconds, without tools or screws. A universal system that works with any standard baby plate, from most known... -
Matthews Pipe Spreader
Used in both vertical and horizontal positions, a pipe spreader is placed at both ends of a 1 1/4" diameter pipe. The two piece system is simply one receptacle for the pipe... -
Kupo Hex Camera Stud 1/4in-20 Male
This is a stud with a hexagonal adapter on one side to be mounted into a Convi or Super Viser Clamp and a round Baby 5/8" (16m) adapter on the other with a 1/4"-20 male... -
Matthews Dutti Dolly Universal Stand Bracket
Stand Brackets for Dutti Dolly track -
Matthews 6in Pin with Collar
Small and easy to keep in that emergency kit, the 6" Pin with Collar can be mounted in a Grip Head, without fear of it slipping through the hole when a light fixture is... -
Matthews Shot Bag - 5lbs
Matthews uses steel shot instead of lead to fill these black cordura bags. Stainless steel and custom shot bags are also available -
Matthews Rock n Roller Combo Wheel (Set of 3)
Why did we name our new accessory wheel family the Rock n' Roller?™ Do they rock? Yes! But they also roll smoothly over rocks, power cables, cable... -
Matthews Baby Pin to 17mm Adapter
Converts 5/8" male to 17mm female. Also, by reversing the position of the set screw and the T-Handle, can be semi-permanently attached to any snap-in accessory (i.e.... -
Matthews Runway Base for Magic Stand
This really low rolling stand base was designed to work with the Magic Stand, but it is also capable of handling any large light fixture mounted directly into its Posi-V-Lock...