Kessler 18 ft. Crane Upgrade Kit
Model: CJ1023
About: Kessler 18 ft. Crane Upgrade Kit
The Kessler 18' Upgrade Kit will upgrade your 12' Kessler Crane to an 18' crane, giving a total reach of 13.5 feet. Included in the upgrade kit is the Extension Section, 18' Tail Extension, 18' Cable Supports and Cable Kits. You must have a 12' Kessler Crane with the Heavy Duty (square) Control Rods, & 'V3' Mounting Plate. The 'V3' mounting plate is identified by the "V3" engraving in the top of the mounting plate (plate used to mount the crane to the tripod head).
Max. Camera Weight: 20 pounds
Safety Precautions
- Maximum Camera Weight: 20 pounds
- Only use with the Kessler Hercules 2.0 (or newer) head with the ball leveling locked out, by flipping over the cup washer.
- NEVER attempt manual tilt with the 18’ configuration. Hercules 2.0 manual tilt should be locked with pin lock.
- ALWAYS use the complete double truss cable support system and Tail Extension that comes with the 18‘ Upgrade kit.
- NEVER use standard weight bar system with 18’ configuration. MUST have V3 mounting plate & Heavy Duty Control Rods.
- NEVER exceed maximum weight capacity of crane, tripod legs or fluid head.
- ALWAYS use common sense and follow Kessler Crane recommended safety procedures while operating crane.
- Contact Kessler Crane with any questions concerning the safe operation of this crane.
Specifications
- Physical Weight: 12 LB
- Dimensions: 48.5"x11.5"x2.5
What's Included
- 18 FT. Crane Upgrade Kit
- 1 Extension Section and Tail Extensions
- 18' Cable support with Kits (Includes knobs and 18' upright supports, 2 frame coupler bars with knobs, 1 control rod coupler bar with knobs)
Reviews: Kessler 18 ft. Crane Upgrade Kit
Warranty: Kessler 18 ft. Crane Upgrade Kit
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
Kessler Crane Lifetime Warranty*
If anything goes wrong with your Kessler Crane product*, relax! Kessler Crane warrants for the life of each Kessler Crane product*, that it is free from defects in material and workmanship. Subject to the conditions and limitations set forth below, Kessler Crane will, at its option, either repair or replace any part of its products that prove defective by reason of improper workmanship or materials. Repaired parts or replacement products will be provided by Kessler Crane on an exchange basis and will be either new or refurbished to be functionally equivalent to new. Customer is responsible for all shipping costs including any international duties/taxes/fees.
* All Kessler Crane brand internal electronic components (i.e. CineDrive, Second Shooter, ORACLE Controller, elektraDRIVE motors, etc) are covered under a one (1) year warranty.
Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered
For Quebec Residents - Disclosure under the Consumer Protection Act
In compliance with Bill 29, AVShop.ca and Kessler do not guarantee the availability of replacement parts, repair services, or maintenance information for any products. Any applicable manufacturer warranties will remain in place.
