Camera Stands & Grips
-
PTZOptics Ceiling Mount - Black
Universal Ceiling Mount for all HuddleCams and PTZOptic cameras Mounts directly to ceiling with included hardware Black powder coat paint provides an attractive, tough and lasting... -
AIDA Imaging PTZ Wall Mount
Universal mount for holding PTZ’s upright on the wall. Best equipped with our PTZ-IP series. Sturdy metal design capable of holding a PTZ on the wall. 4 Holes locations for... -
Marshall CVM-5 Universal 1/4-20 Camera Clip Mount
Clip mount for monitors, desktop, dividing walls. Perfect for Unified Comunications and Teleconference cameras that need to sit gently on top of monitor. -
Marshall CVM-18 Clamp with Adjustable Camera Mount
Adjustable clamp (3" max pole width) with removable swivel ball mount (1/4"-20) for mounting Marshall miniature and compact cameras on trusses, railings, and poles.... -
Sale
Tilta Full Camera Cage for BMPCC 6K Pro - Grey
Arm your camera with the Tiltaing Camera Cage for the Blackmagic Pocket Cinema Camera 6K Pro. This Camera Cage for the BMPCC6K Pro provides protective armor for the camera body... -
Camvate Light Stand Mount to 1/4-20 Mini Ball Head
This handy mount can be directly inserted into the top of a light stand (with column tube diameter no more than 16mm) and fastened by knob. The 1/4’’ male screw... -
Marshall CVM-13 10-inch Gooseneck Arm Mount
Flexible Gooseneck contains a 1/4"-20 (male) to a 1/4"-20 (male), perfect for mounting mini POV cameras. Usable with CVM-12 C-Clamp, CVM-15 Wall Mount Plate, or other... -
Camvate Wall / Ceiling Mount w/ 1/4-20 Stud
The universal mount comes complete with 4 fitting holes to affix a light or small camera on the wall or ceiling. It comes with top 1/4"-20 thread screw adapter to... -
PanaVise 845-246 Deluxe Micro Mount (Cream)
You'll be amazed at the options available with this mount. Build the exact mount you need, right in the field! Modular system: Base, Shaft and Head screw together Two aluminum... -
Marshall CVM-14 Table-Top Tripod Stand
Adjustable, sturdy tripod mount designed for POV cameras with swivel head and adjustable height (1/4"-20). Enables you to get precise viewing angles even under the toughest... -
Camvate C-Clamp Desktop Mount Camera Holder
The Camvate C1122 C-Clamp comes with a 1/4"-20 ball head mount, so you can mount your compatible DSLR Camera, Led video light, etc. It attaches easily to desks, carts,... -
PanaVise 899-06 Pass Thru J-Box Standard Mount (Black)
Sleek design for very clean installs. Hollow aluminum shaft [1.0" (25.4mm) outside diameter; 0.875" (22.2mm) inside diameter] with slot for cable pass thru Round pass... -
Marshall CVM-2 Cold Shoe Mount
1/4"-20 Male to Cold Shoe Adapter -
PanaVise 845-246 Deluxe Micro Mount (Black)
You'll be amazed at the options available with this mount. Build the exact mount you need, right in the field! Modular system: Base, Shaft and Head screw together Two aluminum... -
PanaVise 846L Angle Micro Mount (Black)
ANOTHER GREAT CHOICE FOR THE PERFECT CAMERA INSTALLATION! For specialty installations that require a 90° bend! 0.5" (12.7mm) diameter solid steel shaft Length of mount... -
Camvate Camera Desk Mount Stand (44cm - 105cm)
The Double Extendable Desk Mount Stand features two extendable joints that enable you to adjust available height ranging from 44cm to 105cm. It comes with fully adjustable... -
Camvate Super Crab Clamp w/ 1/4-20 Thread
This CAMVATE Super Clamp specifically comes with an exquisite T-handle that you could hold comfortably for effortless lock or release, and the ratchet lever is... -
PanaVise 851-00 Adjusting Knuckle (Black)
Tilt, Turn & Rotate the camera with our Adjusting Knuckle. Includes knob and set-screw adjusting options. Shaft screws into the adjusting knuckle. For an ultra low-profile... -
PanaVise 899-06 Pass Thru J-Box Standard Mount (White)
Sleek design for very clean installs. Hollow aluminum shaft [1.0" (25.4mm) outside diameter; 0.875" (22.2mm) inside diameter] with slot for cable pass thru Round pass... -
Marshall CV610-U3-WM Wall Mount for CV610 - Black
Wall Mount Plate for CV610 camera -
BirdDog PTZ Camera Wall Mount for P-Series - White
BirdDog Wall Mount for P100 / P200 / P400 Colour: White -
SmallRig 15mm Single Rod Clamp
SmallRig 15mm Single Rod Clamp 1995 is locked into the front end of Top Handle 1955 and 1984 via two M4 screws. It also supports Magic... -
PanaVise 851-00 Adjusting Knuckle (Cream)
Tilt, Turn & Rotate the camera with our Adjusting Knuckle. Includes knob and set-screw adjusting options. Shaft screws into the adjusting knuckle. For an ultra low-profile... -
PanaVise 861 Square Base (Cream)
Square mounting base for solid surfaces, 2.5" x 2.5" (63.5mm x 63.5mm), with four 0.219" (5.56mm) holes on 2.0" (50.8mm) x 2.0" (50.8mm) layout 1/4-20...