JBL VRX918SP 18in Powered Flying Subwoofer

About: JBL VRX918SP 18in Powered Flying Subwoofer

The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.

Features:

• Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
• 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive® woofer for high-power capacity and light weight.
• Integral rigging hardware for simple connection of enclosures and optional array frame.
• 20 mm (m20) threaded pole socket for solid, secure satellite speaker mounting.
• Large port area for reduced distortion.

Specifications:

• Power Rating   :   1500 Watts Peak
• LF: Dual-Bridged Technology™, Class D
• Frequency Range   :   31 Hz – 220 Hz
• Dimensions (H x W x D)   :   508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)
• Frequency Response   :   34 Hz – 220 Hz
• Maximum Peak Output   :   126 dB SPL at 1m
• Bandpass Nominal Impedance   :   LF: 2 x 2 ohms
• LF Driver   :   1 x JBL 2268FF 457 mm (18 in) dual voice coil
• Differential Drive® woofer with neodymium-magnet
• Audio Input Connector   :   XLR with loop through
• User Controls   :   Input Attenuator (0-16 dB)
• Selectable 80 Hz or 120 Hz Low Pass
• 80 Hz High-Pass enable/disable for XLR loop thru.
• Signal Processing   :   DSP based, resident in Input Module
• System Management   :   DSP based limiters for mechanical and thermal protection
• AC Power Operating Range   :   90-132 VAC or 216-264 VAC, 50/60Hz
• AC Line Voltage   :   User selectable: 120V/240V (-15%, +10%)
• AC Input Connector   :   Neutrik PowerCon (NAC 3MPA)
• AC Loop Through Connector   :   Neutrik PowerCon (NAC 3MPB)
• AC Current Requirements   :   6A per system at 120V, 3A per system at 240V
• Enclosure   :   18 mm birch plywood.
• Suspension / Mounting   :   Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
• Finish   :   Black DuraFlex™ finish
• Grille   :   Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
• Net Weight   :   38.5 kg (85 lb)