Phantom Power Supplies
-
Rolls PB224 Dual Phantom Plus
Perfect for any condenser microphone, the new PB224 powers even the high-current draw microphones. The unit features a complete redesign in the voltage supply circuits, offering a... -
Mackie M48 48v Phantom Power Supply
The M48 48v Phantom Power Supply allows you to use your devices and microphones that require external power in any setup. Sometimes the phantom power being supplied is inadequate... -
Whirlwind MICPOWER 4 4-Channel Phantom Power Supply
The Whirlwind MICPOWER 4 (MICP4) is a premium 4 channel stereo phantom power supply. The regulated 4 channel 48 Volt DC output is ultra quiet, introducing no noise into the... -
Denecke PS-2 Dual Microphone Power Supply
The Dcode® Microphone Power Supplies are a line of low noise, 12 and 48 volt power supplies. Each version runs on one 9 volt battery and has enough power to run high current... -
RDL ST-MPA24 Dual Microphone Phantom Adapter
The ST-MPA24 contains two identical phantom power circuits and a common power supply input. If only one mic input is to be converted for phantom operation, only one circuit needs... -
Rolls PB23 Phantom Power Adapter
The PB23 is for powering phantom powered microphones with 48VDC. Since the unit uses a 100KHz switching power supply there is no audio noise generated. It has an output pull down... -
ART Phantom II Pro Dual Channel Power Supply
The Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable... -
ART Phantom 1 48V Power Supply
Different condenser microphones specify different amounts of required phantom power. As a rule these ratings can range from 48 volts all the way down to 9 volts. Fortunately,... -
Sennheiser MZA 900P Phantom Power Adaptor
The MZA 900 P phantom power adaptor is used to connect pre-polarized condenser microphones with a 3.5mm jack plug to microphone inputs with 10 – 52 V phantom powering (P12... -
Rolls PB223 Dual Phantom Power Adapter
The PB223 is for powering phantom powered microphones with 48VDC. Since the unit uses a 100KHz switching power supply there is no audio noise generated. The PB223 has output pull... -
Rolls RPB486 Phantom Hex Power Supply
The RPB486 powers up to 6 condenser microphones with 48 volts of ultra clean phantom power. The outputs are 1/4" Tip-Ring-Sleeve balanced for easy connection to a digital... -
Radial StageBug SB-48 Phantom Power Supply
The Radial SB-48 is a high performance phantom power generator that employs a non-radiating charge pump circuit to create a stable, ripple-free 48 volt supply for active direct... -
AKG PAE Reference Phantom Power Module
The PAE M reference phantom power module for fixed and mobile installation provides a gold-plated three-pin XLR connector. With its wide voltage range the module will fit most... -
AKG MPA V L Phantom Power Adapter
Phantom power adapter with XLR connector for L type MicroMic microphones with integrated bass roll-off switch. -
AKG PAE5 Reference Phantom Power Module
The PAE5 M reference phantom power module for fixed and mobile installation provides a five-pin XLR connector that allows the audio signal and the control voltage for a LED ring... -
Denecke PS-1A Microphone Power Supply
The Dcode® Microphone Power Supplies are a line of low noise, 12 and 48 volt power supplies. Each version runs on one 9 volt battery and has enough power to run high current... -
Audix APS910 In Line Phantom Power Adapter
The APS910 is a professional phantom power adapter designed to convert 9-52 volts of phantom power to 2.5-volt electret microphones with an internal impedance converter and... -
Audix APS911 AA Battery/Phantom Power Adapter
Optional phantom power adapter for use with electric condenser microphones. Runs on AA batteries when phantom power is not available. Features on/off switch and bass roll-off... -
Audix APS2 Two Channel Phantom Power supply
Two-channel 48V phantom power supply for condenser microphones. 110V is switchable to 240V. Detachable power cord.