Level Matching Transformers
-
ART CLEANbox Pro Dual Channel Level Converter
The CleanBox Pro is a convenient solution for connecting consumer A/V and professional audio equipment. It provides two channels of unbalanced-to-balanced level conversion, and... -
RapcoHorizon LTIGLBLOX 3.5mm to XLR Interface
LTIGLBLOX is a consumer to pro interface. It converts input from consumer grade equipment (laptop computers, MP3 players, CD players) to a mic level balanced... -
RapcoHorizon LTIBLOX Laptop Interface
LTIBLOX is a consumer to pro interface. It converts input from consumer grade equipment (laptop computers, MP3 players, CD players) to a mic level balanced... -
RDL TX-J2 Unbalanced Input Transformer
Unbalanced stereo inputs to summed balanced mono output Features: Mix two unbalanced audio signals to mono balanced Combine stereo into mono with balanced output Unbalanced to... -
Whirlwind ISOPOD Line Level Summing Balancer (3.5mm to XLR)
Housed in a high impact nylon casing, the ISOPOD safely sums to mono and transformer isolates unbalanced 1/8" (3.5mm) stereo connections to balanced, XLR. Nominal insertion... -
RDL TX-1A Balanced to Unbalanced Transformer - Adjustable
Features: Provides transformer isolation between balanced line and unbalanced input Level trimpot adjusts output 4 to 24 dB below input level Input may be 10 kΩ bridging or... -
Canare BCJ-XJ-TRC 110 Ohm to 75 Ohm Impedance Transformer
110 - 75 ohm Impedance Transformer. 3-Pin female XLR to female BNC Features SMPTE 276M and AES3 Transmission Standard Coaxial transmission of 2 Channel Digital Audio Allows... -
RDL Bridging Input Transformer
Used to add transformer isolation to any line‑level RDL product input Frequency response: 20 Hz to 20 kHz (+/‑ 0.5 dB) THD: < 0.05% (1 kHz) 10... -
RDL TX-A2 Audio Converter - Balanced to Unbalanced
The TX-A2 is the ideal choice in installations requiring passive isolation and level attenuation between a professional balanced line-level mono source and consumer equipment... -
Whirlwind IMP PAD 20dB XLR Pad
Input a line signal into a mic pre or match levels between two pieces of gear with these precision in-line H-pads. The IMP PAD 20 provides 20dB attenuation. A set of IMP PADs is a... -
RapcoHorizon LTIBLOX-NK Laptop Interface (No Volume Knob)
LTIBLOX-NK is a consumer to pro interface. It converts input from consumer grade equipment (laptop computers, MP3 players, CD players) to a mic level balanced... -
RapcoHorizon DBBLOXF LoZ-HiZ Imedance Converter
DBBLOXF converts low impedance source to high impedance load. Features XLR female input and 1/4 inch output. DBBLOX version also available to convert high... -
DSAN LSP-1 Laptop Sound Port 3.5mm to XLR Adapter
The Laptop Sound Port is a compact adapter that plugs into a laptop computer's speaker jack, changes the output to a mono balanced mic-level signal and mates with standard XLR... -
Shure Line Matching Transformer
The Shure A85F is a low- to high-impedance microphone-matching transformer that provides 24 dB of signal increase gain. It has balanced female XLR and unbalanced high impedance... -
Shure 50 dB Attenuator
The Shure A15LA 50 dB attenuator reduces the level of an audio signal by 50dB. This allows a line level output such as an aux level output from a mixer or playback device, to be... -
Rolls MB15b Promatch 2-Way Stereo Converter
The MB15 ProMatch converts consumer level stereo RCA signals to balanced XLR professional line level, and back. One side of the unit, labeled 1, has two XLR inputs and stereo RCA... -
Audio Technica CP8201 Mic Impedance Transformer
The Audio-Technica CP8201 Microphone Impedance Matching Transformer is designed to connect a low-impedance microphone to a high-impedance electronic input. The high-quality... -
Shure Line Matching Transformer (XLR to 1/4'' Male Plug/Female Jack)
The Shure A95UF is a reversible transformer that matches low-impedance microphones to high-impedance inputs or high-impedance microphones to low-impedance inputs. The transformer... -
Hosa MIT-176 Impedance Transformer XLR to 1/4in
This adaptor is designed to match 200R output impedance to 50K input impedance. It is ideal for connecting a microphone to hi-Z instrument jack. Maximizes signal fidelity when... -
RDL EZ-AFC2 Audio Format Converter
The EZ-AFC2 is a stereo bi-directional audio format converter with level controls. Conversion is provided between balanced rear-panel XLR jacks and unbalanced front-panel RCA... -
Morley LLS-2 Line Level Shifter (2 Channel)
The LLS-2 Line Level Shifter & Hum Elliminator from Morley/Ebtech is a handy two-channel utility that effectively provides line level transformation between balanced and... -
Radial J+4 Active Stereo Line Driver
The Radial J+4 is a stereo interface designed to accept unbalanced low output level devices such as instruments, computers or CD players and boost the signal to a balanced +4dB... -
RapcoHorizon LTI-1 Laptop Interface
Connect your laptop's headphone or audio out to a professional sound system. Stereo or summed mono operation selectable by user. Built in ground lift... -
Neutrik NADITBNC-M BNC-f to XLR-m Impedance Transformer
Female BNC 75 Ω input - male XLR chassis connector 110 Ω output. Interface balanced and coaxial lines. Features: Allow long cable runs for digital audio signals via...