Menu

Free shipping on most orders over $199!*

Shure KSM141 Dual Pattern Instrument Microphone

Model: KSM141/SL

Shure KSM141 Dual Pattern Instrument Microphone
  • Free Shipping!
  •  Special Order: Contact us for Lead Time 
  • Not yet reviewed



About: Shure KSM141 Dual Pattern Instrument Microphone

The KSM141 is a large diaphragm end-addressed condenser microphone with a rotating collar allowing easy switching between a highly consistent cardioid or true omnidirectional polar pattern for smooth and extremely focused sound reproduction.

Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments. 

  • KSM141/SL with windscreen and carrying case, champagne finish

Features:

  • A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns. Provides flexibility in a wide variety of recording applications
  • Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar® diaphragm for superior transient response
  • Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
  • Premium electronic components, including gold-plated internal and external connectors
  • Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect

Performance Characteristics

  • Extended frequency response
  • Low self-noise
  • Exceptional reproduction of low-frequency sounds
  • Can withstand high sound pressure levels (SPL)
  • High output level
  • No crossover distortion
  • Uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference

Applications

Some typical applications for the KSM141 are listed below. Microphone use, however, is a matter of personal taste. The KSM141 may be used for a variety of applications other than those listed.

  • Acoustic instruments -- such as piano, guitar, drums, percussion, strings
  • Wind instruments -- brass and woodwind
  • Low frequency instruments -- such as double bass, electric bass, kick drum
  • Overhead miking -- drums or percussion
  • Ensembles -- choral or orchestral
  • Room ambiance pick-up -- guitar amplifier or drums

Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.

Specifications:

Cartridge Type
Permanently Biased Condenser
 
Frequency Response
20 to 20,000 Hz
 
Directional Polar Pattern
Cardioid/Omnidirectional
 
Output Impedance
150 ohms (actual)
 
Attenuation Switch
0 dB, 15 dB, or 25 dB attenuation
 
Low Frequency Response Switch
Flat; -6 db/octave below 115 Hz;
-18 dB/octave below 80 Hz
 
Phantom Power
48 Vdc +/- 4 Vdc (IEC­268­15/DIN 45 596), positive pins 2 and 3
 
Current Drain
4.65 mA typical at 48 Vdc
 
Common Mode Rejection
>50 dB, 20 Hz to 20 kHz
 
Polarity
Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
 
Dimensions and Weight
20 mm (0.8 in.) diameter, 146 mm (5.75 in.) long;
156 grams (5.5 oz.)
 
Sensitivity (typical, at 1000 Hz; 1 Pa = 94 dB SPL)
­-37 dBV/Pa
 
Self­noise (typical, equivalent SPL; A-weighted, IEC 651)
14 dB
 
Maximum SPL
5000 ohm load (Attenuator on): 145 (160, 170) dB
2500 ohm load (Attenuator on): 139 (154, 164) dB
1000 ohm load (Attenuator on): 134 (149, 159) dB
 
Output Clipping Level*
5000 ohm load: 15 dBV
2500 ohm load: 9 dBV
1000 ohm load: 3 dBV
 
Dynamic Range
5000 ohm load: 131 dB
2500 ohm load: 125 dB
1000 ohm load: 120 dB
 
Signal to Noise Ratio**
80 dB
 
*20 Hz to 20 kHz; THD < 1%. THD of the microphone preamplifier when applied input signal is equivalent to the cartridge output at specified SPL.
**S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.

UPC: 042406110143

Videos: Shure KSM141 Dual Pattern Instrument Microphone

Reviews: Shure KSM141 Dual Pattern Instrument Microphone

There are currently no product reviews.


Warranty: Shure KSM141 Dual Pattern Instrument Microphone

AVShop.ca Warranty:

30 Days

Manufacturer's Warranty:

Shure wired - 2 Year Limited
Shure Professional Wireless - 1 Year Limited
Shure Q5X - 1 Year Limited
Shure Rechargeable batteries - 1-year limited
No warranty on Shure Software

Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered