Audio Technica AT2035 Cardioid Condenser Microphone

About: Audio Technica AT2035 Cardioid Condenser Microphone

Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.

Exceptional Detail and Low Noise

• The performance of this side-address mic makes it an excellent choice for both studio and live applications.

Perfect Mic for Creators

• With its smooth, natural sound, the AT2035 is ideal for musicians, streamers, podcasters, and other content creators.

Professional Extras

• The AT2035 is equipped with a switchable 80 Hz high-pass filter and 10 dB pad, and comes with a custom shock mount.

Features

• Large diaphragm for smooth, natural sound and low noise
• High SPL handling and wide dynamic range provide unmatched versatility
• Custom shock mount provides superior isolation
• Switchable 80 Hz high-pass filter and 10 dB pad
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Includes custom shock mount & protective pouch

Specifications

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
• Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
• Noise: 12 dB SPL
• Dynamic Range: 136 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 3.8 mA typical
• Switches: Flat, roll-off; 10 dB pad (nominal)
• Weight: 403 g (14.2 oz)
• Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Audio-Technica Case Style: R5

Accessories Include:

• AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch