Beyerdynamic DT 297 PV MK II Dual-Ear Headset w/ Condenser Mic - 80 Ohm

About: Beyerdynamic DT 297 PV MK II Dual-Ear Headset w/ Condenser Mic - 80 Ohm

The DT 297 PV MK II  lightweight, compact and closed headset is particularly suitable for moderations. The headset features a powerful neodymium magnet system, very high reproduction precision and optimized speech reproduction for best intelligibility. The microphone can be adjusted to an optimal angle of incidence by the flexible gooseneck. The microphone holder can be rotated so that the microphone can be worn either on the left or right side.

• Immunity to high-frequency disturbance (RFI) caused by GSM, DECT, UMTS, Tetra, etc.
• High-quality condenser microphone capsule with cardioid characteristic, very good bass response, high noise cancellation and feedback prevention
• Flexible, swivelling gooseneck for optimum positioning
• Made in Germany

HIGH ​​​​​​​WEARING COMFORT

The velvet-covered soft, circumaural ear shells and the padded, adjustable headband ensure a high level of wearing comfort.

HIGH FEEDBACK IMMUNITY

The cardioid polar pattern ensures high feedback immunity and noise cancellation. The wide transmission range enables clear and precise speech transmission with high syllable intelligibility.

MADE IN GERMANY

The broadcast headphones and headsets are and always have been handcrafted in Germany. The materials and component parts used are painstakingly made by hand and can be replaced if necessary.

Specifications

• Headphone
  • Transducer principle - Dynamic
  • Operating principle - Closed
  • Transmission range - 10 - 30,000 Hz
  • Nominal impedance - 80 Ω
  • Nominal sound pressure level at 1 kHz - 100 dB
  • T.H.D. - < 0.2%
  • Ambient noise insulation - approx. 16 dBA
  • Average pressure on ears - 4.5 N
  • Weight without cable - 240 g
• Microphone
  • Transducer principle - Condenser (back electret)
  • Transmission range - 40 - 20,000 Hz
  • Polar pattern - Cardioid
  • Output voltage at a distance of 5 cm - 5.5 mV
  • Nominal impedance - approx. 300 Ω
  • Nominal output impedance - > 1000 Ω
  • Open circuit voltage - 5 mV/Pa at f = 1 kHz
  • Max. SPL - 132 dB
  • S/N ratio - 62 dB
  • Current consumption - approx. 3.5 mA
  • Phantom supply - 12 - 48 V

NOTE: All versions of the DT 297 are supplied without a connection cable. Please order the desired connection cable at the same time.