Accessories
-
Eartec UltraLITE Lithium Ion Battery
Spare battery for Eartec UltraLITE headsets and Hub -
Clear-Com BAT50 Rechargeable Battery
The BAT50 is a Li-Ion rechargeable battery used to operate the DX410 beltpacks and WH220 all-in-one wireless headset. The BAT50 batteries are recharged using the AC50 Battery... -
Telex C-8 Moleskin Ear Cushion
Replacement moleskin ear cushion for Telex lightweight intercom headsets, such as PH-88 and PH-44. Does not fit legacy headsets with white lettering. -
Eartec UltraLite Replacement Mic Cover (8-Pack)
Replacement foam microphone covers for Eartec UltraLite headsets -
Hollyland SOLIDCOM C1 Battery
SOLIDCOM C1 Battery -
Telex RTV-04 Telethin Driver - 125 ohm
The Telethin magnetic receivers are available in 5 different impedances which permit a choice of impedance for any application. For inconspicuous use, the receiver is extremely... -
Eartec Soft Padded Case - Large
Eartec Large Soft Padded Case for UltraLite & UltraLite PRO16 Systems Eartec’s Softside Case will keep your wireless system stored safely. Constructed of... -
Eartec Soft Padded Case - Small
Eartec Small Soft Padded Case for UltraLite & UltraLite PRO16 Systems Eartec’s Softside Case will keep your wireless system stored safely. Constructed of... -
Eartec Rechargeable Li-Ion Battery For SC-1000 Plus 2-Way Radio
The Eartec SCLI800BAT Rechargeable Li-Ion Battery is specially designed for use with SC-1000 Plus 2-Way Radio. -
Eartec SST Replacement Clear Ear Tubes
Replacement Clear Ear Tubes for Eartec SST headset -
Hollyland Solidcom C1 Pro HUB Antenna (2 Pack)
Replacement antennas for Hollyland Solidcom C1 Pro Hub Specifications Frequency range: 1.88–1.93GHz VSWR: 1.88-1.93G≤2.0 Impedance: 50Ω Gain:... -
Eartec EVADE Rechargeable 3.7 Volt Lithium Polymer Battery
All new EVADE transceivers come complete with a Lithium Polymer rechargeable battery. The batteries are also available separately as replacements. Since they are field... -
Eartec HUB Audio Output Cable - XLR
HUB to XLR Cable allows output of program audio from Hub mini base or UltraPak beltpack. Length: 107cm -
Eartec 12V Adapter for 8-Port/10-Port Charger
In industries where work requires a vehicle, including crane cab, pavement striper or tree care truck, the 12 Volt adapter is a terrific addition. This adapter plugs into the... -
Eartec HUB Audio Input Cable - 1/4in
HUB to XLR Cable allows input of audio into Hub mini base or UltraPak beltpack. Length: 107cm -
Bubblebee The Sidekick Spares Kit
The Sidekick Spares Kit is a full collection of accessories for your Sidekick In-Ear IFB Monitor. This tool kit includes each variation of Sidekick eartip (two of each... -
Hollyland Replacement Headset Speaker Assembly for Solidcom C1
Replacement headset speaker assembly for the Hollyland Solidcom C1 Headset (Master and Remote) -
AVShop Kenwood Radio Headset Cable Only (for making adaptors)
Adaptor cable used to make accessories for Kenwood Radios (4 wire, Clearcom interface, etc) 4 Positions wired, contact for details -
Eartec EVADE Leatherette Earpad (set of 2)
Replacement Earpad for EVADE, Bag of 2 earpads -
Shure EAC-IFB MMCX Earphone IFB Cable
The EAC-IFB Accessory Cable from Shure permits the integration of low-profile Sound Isolating™ Earphones into intercom applications. The clear, durable cable is ideal for... -
Eartec 12V Adapter for 2-Port Charger
In industries where work requires a vehicle, including crane cab, pavement striper or tree care truck, the 12 Volt adapter is a terrific addition. This adapter plugs into the... -
Telex CMT-98 Telethin Straight Cord - 1/8in Connector
The CMT-98 is a 5 foot long cord with a 1/8" (3.5mm) connector for use with Telex earpieces -
Telex ET-4 Coiled Acoustic Eartube
Coiled Acoustic Eartube with Clothing Clip for Use with Earcones (Includes One Each: S, M, & L Earcones) -
Telex ET-2 Coiled Acoustic Eartube
The ET-2 are inconspicuous clear plastic tubes that carry the sound effectively from a Telex Telethin receiver to the talent's ear without revealing the cord to the camera....