Accessories
-
Eartec UltraLITE Lithium Ion Battery
Spare battery for Eartec UltraLITE headsets and Hub -
Eartec UltraLITE 2-Battery Charger Charging Base
The standard 2 port charging base comes with the purchase of any package of UltraLITE headsets. This smart charger includes LED indicators that turn from red to green when the... -
Eartec 12V Adapter for 2-Port Charger
In industries where work requires a vehicle, including crane cab, pavement striper or tree care truck, the 12 Volt adapter is a terrific addition. This adapter plugs into the... -
Eartec UltraLITE 8-Battery Charger Charging Base
The 8 port charging base comes with the purchase of any package of UltraLITE HUB system. This smart charger includes LED indicators that turn from red to green when the... -
Eartec Comstar Headset Lithium Battery
Replacement battery for Eartec COMSTAR Headset -
Eartec UltraLite Replacement Mic Cover (8-Pack)
Replacement foam microphone covers for Eartec UltraLite headsets -
Eartec UltraLite Replacement Earpad (2-Pack)
Set of 2 replacement earpads for Eartec UltraLite headset -
Eartec Soft Padded Case for Ultralite - Small
Small padded bag for select Ultralite systems -
Eartec Soft Padded Case for Ultralite - Large
Large padded bag for select Ultralite systems -
Eartec Rechargeable Li-Ion Battery For SC-1000 Plus 2-Way Radio
The Eartec SCLI800BAT Rechargeable Li-Ion Battery is specially designed for use with SC-1000 Plus 2-Way Radio. -
Sennheiser Steel Headset Cable with XLR-4F (6.6ft)
The 502461 Cable from Sennheiser is a 6.6' steel headset cable with XLR-4F connectors, ideal for use with ClearCom intercoms and boxes. -
Sennheiser Straight Headset Cable with XLR and 1/4in (6.6ft) for HMD
Copper cable with short coiled part for minimum structure born noise, XLR-3 connector and 6,3 mm (¼") jack plug -
Sennheiser Steel Headset Cable with XLR-5 (6.6ft)
The 502462 Cable from Sennheiser is a 6.6' steel headset cable with an XLR-5 connector on each end. -
Sennheiser Headset Cable with XLR and 1/4in (6.6ft) for HME 26-II
The 502460 Cable from Sennheiser is a 6.6' steel headset cable with an XLR-3 connector on one end and a 1/4" connector on the other. It accepts 48V phantom power. Works... -
Clear-Com TR-50 Monaural IFB Talent Receiver
Monaural IFB Talent Receiver 1/8" Mini Jack Includes TS-1 An amplified single-channel talent beltpack with volume control. It connects to the Program Interrupt... -
Clear-Com AB-120 On-Air Announcer Console
The On-Air Announcer Console is the ultimate broadcast-quality tool for announcers and commentators, the AB-120 integrates all of the inputs, outputs, and controls necessary at... -
Clear-Com V-BOX Enclosure
V-Box permits either angled or vertical portable, desktop or wall mounting of the KB-702, KB-702 GM, and KB-701 speaker stations. Both male and female 3-pin XLR connectors on side... -
Clear-Com MT-701 Isolation Box
The MT-701 is an isolation box that is used to reduce hum in Encore Partyline products when multiple grounds are present. The MT-701 can also be used to bridge two Encore... -
Clear-Com SP-3 3-way Intercom Line Splitter
One 3-pin female and three 3-pin male XLR type connectors. -
Clear-Com CEP-RK Rackmount Kit
Rack Mount Kit for IFB control and expansion panels (1RU). Holds 3 IFB panels (MA-704 or AX-704). -
Clear-Com WP-2 2-Channel Selectable Intercom Wall Plate
2-Channel Selectable Intercom Outlet Wall Plate, 3-pin male connector and channel select switch on a single-gang wall plate -
Clear-Com YC-36 3-Pin to 6-Pin Adapter
The YC-36 is a 3-pin to 6-pin adapter. It can combine 2 single-channel 3-pin cables into a single 2-channel 6-pin connector. This cable is for use with RS-602 ad RS-622... -
Clear-Com PIC-4744 IFB Router
The PIC-4744 IFB Router provides four XLR3M analog partyline level audio outputs (Talent channels) and four XLR3F analog line level audio inputs (Program channels). Talent... -
Eartec Simultalk SLT24G Battery Pack
SLT 24G Replacement Battery Pack