Shure
-
Shure UA874 Active Directional Antenna
Experience improved wireless reception with the UA874. This UHF antenna uses a log periodic dipole array to produce a cardioid pattern toward the desired coverage area, achieving... -
Shure UA844+SWB Antenna Distribution System
The Shure Model UA844+ is an antenna distribution system that allows for the expansion of wireless microphone systems by splitting one pair of antennas to multiple receivers. It... -
Shure WA302 Instrument Cable
Instrument cable connects a 1/4" jack to a 4-pin mini-connector for bodypack transmitters. Features a 2.5 foot (0.75 m), length with 1/4-inch plug and 4-pin mini connector... -
Shure UA221 Passive Antenna Splitter/Combiner Kit
The Shure UA221 Antenna Splitter/Combiner Kit includes two adapters that can be used as one-input, two-output or two-input, one-output passive antenna splitter/combiners for UC4,... -
Shure WA330 TA4F Connector
Switchcraft TA4F Connector -
Shure UA825 25ft Coaxial Antenna Cable
Coaxial Cable, BNC-BNC, RG8X/U type, 50 Ohm, 25 ft length (7.5 m). -
Shure UA860SWB Passive Omnidirectional Antenna
The Shure UA860SWB is a passive wide band UHF omnidirectional antenna (470-1100Mhz). The UA860SWB is weather resistant and suitable for use outdoors. For use with SLX, ULX, UC,... -
Shure UA850 50ft Coaxial Antenna Cable
Coaxial Cable, BNC-BNC, RG8X/U type, 50 Ohm, 50 ft length (15 m). -
Shure UA400B 1/4 Wave Antenna
Antenna, 1/4 Wave, for BLX4R, SLX4, PSM300, U4S, U4D and UC4 Receivers, 470-752 MHz -
Shure WA621 BLX2 ID Colour Caps (5-Pack)
A kit of 5 ID caps in blue, green, yellow, white, and red. Works with BLX2 Handheld Transmitters. -
Shure SB903 Lithium-ion Battery for SLX-D Transmitters
Want to know the exact amount of battery charge left? SB903 rechargeable lithium-ion batteries unlock real-time battery life and battery health features for SLX-D Digital Wireless... -
Shure SBC200 Add On Dual-Docking Battery Charger (No PSU)
The Shure SBC200 ​Dual Docking Recharging Station holds two transmitters, bodypacks, or SB900-series batteries. It may be used in any appropriate location with adequate space... -
Shure UA600 Front Mount Antenna Kit
Antenna Kit, Front Mount, for SLX4, UR4S, UR4D and ULX Single Receivers, includes 2 coaxial antenna cables and 2 bulkhead adapters. -
Shure UA864US Wall/Ceiling Mounted Antenna (470-698 MHz)
The UA864US antenna provides wideband RF coverage in a low-profile enclosure that mounts easily on a wall or ceiling. Works with ULX-D® Digital, UHF-R®, and ULX®... -
Shure 65AA8548 Replacement Battery Cup for ULX2 Transmitter
Screw-on Battery Cup for ULX2 Series Handheld Transmitters -
Shure WA615M 5 Colour ID Rings Shure Wireless Mics
Multi-colored ID rings for most Shure wireless handheld microphones. Includes white blue yellow orange and red. The rings secure into place above the battery cover as shown in the... -
Shure UA8100 100ft Coaxial 50Ohm Antenna Cable RG213
Shure antenna cable for wireless systems (not GLXD) constructed using RG213/U low loss cable. Length 100' Connectors - BNC -
Shure UA700 Replacement Bodypack Antenna (470-530MHz)
Replacement bodypack antenna for Shure UR1/UR5/P9R/P10R (470-530MHz) -
Shure SBC10-100-US Single Battery USB Charger
The SBC10-100-US USB Single Battery Charger can be powered from both A/C power sources and USB ports. Works with SB900 and SB900A. Comes with power adaptor -
Shure SBC-AX Charging Module for 2 SB900 Batteries
SBC-AX charges two SB900A Rechargeable Batteries in the SBRC Shure Battery Rack Charger. Configurable bays in the SBRC allow for mixing and matching of up to four charging... -
Shure UA8 1/2 Wave Omnidirectional Antenna (470-636 MHz)
UA8 is a 1/2 wave omnidirectional receiver antenna for Axient receivers (frequency range dependent) and PSM transmitters. Features 0-, 45-, and 90-degree positioning for increased... -
Shure BLX2 / SM58 Replacement Handle Assembly
Replacement handle assembly for BLX2/SM58 -
Shure 65DA8451 Battery Cup PGXD2
Replacement battery cup/cover for PGXD2 handheld transmitter -
Shure BLX2 / PG58 Replacement Handle Assembly
Replacement handle assembly for BLX2/PG58