Presonus Eris Pro Sub 10 Active 10-Inch Front-Firing Studio Subwoofer

About: Presonus Eris Pro Sub 10 Active 10-Inch Front-Firing Studio Subwoofer

Intended for serious personal studios and professional music-production environments, the Eris Pro Sub 10 helps you take charge of the low-frequency foundation of your mix. An ideal companion to Eris Pro- and Eris Studio-series reference monitors, the Eris Pro Sub 10 complements full-range monitors without overshadowing them and extends the reach of your full-range system's low end with a natural sound.

Features

• 10-inch, front-firing, glass-composite, low-frequency transducer
• Front-firing, bass-reflex acoustic port
• Continuously variable lowpass filter (50 Hz to 130 Hz) sets the upper frequency reproduced by the subwoofer
• Switchable highpass filter removes frequency content below 80 Hz from the full-range subwoofer outputs to the main monitors
• Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
• Input gain control (-30 dB to +6 dB, continuously variable), polarity invert switch, and ground-lift switch
• 170 watt (RMS), Class AB amplification for up to 113 dB SPL, with a frequency response of 20 to 200 Hz
• Left and right, balanced XLR and ¼-inch TRS and unbalanced RCA main inputs
• Left and right balanced XLR and ¼-inch TRS outputs and XLR subwoofer output for connecting a second Eris Pro Sub 10

Powerful and musical, the PreSonus Eris Pro Sub 10 active, front-firing studio subwoofer is designed to deliver fast and accurate transient response, extending low frequencies down to 20 Hz, allowing you to hear the full-spectrum range of your mix. Driven by 170W (RMS) Class AB amplification, the Eris Pro Sub 10's 10-inch, glass-composite, low-frequency driver delivers tight, responsive sub-bass, thanks to its lightweight and rigid cone. This design provides lower distortion than other materials for sub-bass reproduction that's as coherent and clear as your full-range monitors.

Extensive user controls include input gain, continuously variable lowpass filter for creating a seamless crossover transition, and a switchable highpass filter that removes content below 80 Hz from the full-range signal sent to the monitors. A continuously variable lowpass filter (50 Hz to 130 Hz) allows you to create a seamless crossover transition between the full-range studio monitors and subwoofer for the most accurate listening environment possible.

Versatile Connectivity.

Eris Pro Sub 10 subwoofers provide the connections needed to act as the central hub for a basic monitoring setup, including left and right balanced XLR and ¼-inch TRS and unbalanced RCA main inputs. Connect full-range monitors with left and right balanced XLR or ¼-inch TRS outputs. An XLR subwoofer output lets you connect a second Pro Sub 10.

Seamless System Integration.

The Eris Pro Sub 10 integrates seamlessly with your full-range monitors. A variable lowpass filter sets the upper (crossover) frequency reproduced by the subwoofer. A switchable highpass filter on the full-range outputs helps avoid frequency cancellation and reinforcement in the subwoofer’s upper range, while a polarity-invert function ensures your system is in phase. A momentary footswitch (included) makes it easy to compare your mix with or without sub-bass frequencies.

Specifications

• Electronics
  • Voltage -  120V
  • Wattage -  250W Peak, 170W RMS
• Hardware
  • Cabinet Material -  Vinyl-Laminated, Medium-Density Fiberboard
• Monitors
  • Protections
    • RF Interference
    • Output-Current Limiting
    • Over-Temperature
    • Turn-On/Off Transient
    • Subsonic Filter
  • Audio Switches
    • Polarity Switch: 0 degrees or 180 degrees
    • Ground Lift Switch: On/Off
    • High Pass Filter Switch: On/Off
    • Bypass Footswitch: On/Off
  • Audio Controls
    • Volume 
    • High Pass 
    • Low Pass 
    • Polarity 
    • Ground Lift 
    • Bypass 
    • Power Saver
  • Peak SPL -  113 dB (@ 1 Meter)
  • Monitor Inputs
    • 2x Balanced XLR
    • 2x Balanced 1/4" TRS
    • 2x Unbalanced RCA
  • Monitor Outputs
    • 2x Balanced XLR
    • 2x Balanced 1/4" TRS
    • 1x Balanced XLR 'Sub Out'
  • LF Transducers -  10" Glass-Composite, Front-Firing
  • Frequency Response -  20 Hz to 200 Hz
  • Dimensions (HxWxD) -  15.75 x 12.6 x 15.98 Inch (400 x 320 x 406mm)
  • Weight -  37.04 lbs (16.8 kg)

What's in the Box

• 1x PreSonus Eris Pro Sub 10
• 1x IEC Power Cable
• 1x Footswitch with Cable
• Quick Start Guide