Genelec 4420A Smart IP Installation Speaker (Each) - White

About: Genelec 4420A Smart IP Installation Speaker (Each) - White

The 4420A packs the power and flexibility of Smart IP technology into an ultra-compact enclosure, bringing clarity, intelligibility and uniform room coverage to the tightest of spaces.

The bi-amplified Smart IP Genelec 4420A install loudspeaker is a compact two-way active loudspeaker for fixed installations. It requires only one CAT cable to connect, making installation easy. The 4420A loudspeaker is powered using the standard Power-over-Ethernet (PoE) technology, using PoE+ or PoE standards. The proprietary internal power supply in 4420A delivers an impressive short-term SPL.

• AoIP - Our 8430 and Smart IP models support IP audio streams, for today’s highly networked world.
• PoE Power - Power-over-Ethernet allows our Smart IP loudspeakers to deliver impressive performance over a single CAT cable.
• Smart IP Manager - Powerful software that provides total control of Smart IP networked loudspeaker systems.
• Active crossover operating at low signal levels.
• Directivity Control Waveguide (DCW) for flat on and off-axis response.
• Intelligent Signal Sensing (ISS) for power consumption reduction in stand-by mode.
• Minimum Diffraction Enclosure (MDE) for uncoloured sound reproduction.
• Each transducer is driven by its own optimised amplifier.
• Sophisticated drive unit protection circuitry for safe operation.
• Advanced reflex port design for extended low frequency response.
• Versatile mounting options for all installation needs.

Power to the speaker

Combining class-leading sound quality with single cable convenience, the 4420 uses PoE to produce uncompromised acoustic performance, and is fully compatible with both Dante and open streaming standards such as AES67. Producing huge sound from a tiny footprint, the 4420 delivers 100 dB of maximum SPL and low frequency extension right down to 55 Hz.

Power to the installer

As part of the Smart IP family, the 4420 integrates tightly with our Smart IP Manager software – which allows installers to configure an almost unlimited number of rooms, zones, loudspeakers and audio channels, and includes device discovery, a versatile room EQ tool set, system organisation and status monitoring. After which, a public API command set allows the 4420 to be integrated into house automation systems for day to day use. Easy.

Specifications

• Lower cut-off frequency, -6dB -  ≤ 55 Hz
• Upper cut-off frequency, -6dB -  > 42 kHz
• Frequency response within ± 1.5 -  dB 62 Hz – 20 kHz
• Minimum delay from analogue input to acoustic output - 2.3 ms
• Maximum short-term sine wave output on axis in half space, average 100 Hz to 3 kHz, at 1 m, using PoE+ power - ≥ 100 dB SPL
• Maximum long-term RMS acoustic output in same conditions with IEC-weighted noise, at 1 m using PoE+ power (limited by driver unit protection circuit and the PoE power supply being used) - ≥ 94 dB SPL
• Maximum peak acoustic output per unit in a listening room with music material, at 1 m, using PoE+ power - > 104 dB SPL
• Self-generated noise level in free space, at 1 m on the acoustical axis, A-weighted - ≤ 5dB
• Harmonic distortion at 85 dB SPL at 1 m on axis 
  • Frequency range 50 – 200 Hz - < 3%
  • Frequency range >200 Hz - < 0.5%
• Dispersion angle (degrees), horizontal - 120°
• Dispersion angle (degrees), vertical - 100°
• Bass driver - 105 mm (4 in) cone
• Treble driver - 19 mm (3/4 in) metal dome
• Input / Crossover
  • Ethernet connection
    • 100BASE-TX
    • 1 x RJ45
  • Nominal SPL with 0 dBFS digital audio input at maximum sensitivity -  130 dB SPL
  • Audio-over-IP streaming formats -  AES67, Dante
  • Analogue input, connector type -  3 pin Euroblock
  • Analogue input, Input impedance -  10 kOhm, balanced
  • Analogue input level for 100 dB SPL at 1 m -  -6 dBu
  • Analogue input, maximum input signal -  24dBu
  • Crossover frequency, bass/treble -  2.9 kHz
  • Number of user-adjustable filters -  20
  • User selectable filters, choice of function for each user-adjustable filter
    • parametric notch
    • high frq. shelve
    • low frq. shelve
    • bass roll-off
    • bass tilt
    • treble tilt
  • User selectable filters, parameter adjustment ranges for a notch filter
    • Gain - -20…+2 dB
    • Q-value - 0.1…20
    • Center frequency - 10 Hz…16 kHz
  • Sensitivity, adjustment range -  -60…0 dB
  • Delay, adjustment range -  0…98 ms
• Amplifier 
  • Bass amplifier output power, short-term -  50W
  • Treble amplifier output power, short-term -  50W
  • Supply power at switch, power-over-Ethernet
    • PoE+ (Class 4) - 30 W
    • PoE (Class 3) - 15.4 W
  • Supported PoE standards
    • PoE+ (supports signature and LLDP) - IEEE 802.3at
    • PoE (supports signature) - IEEE 802.3af
  • CAT cable specification -  5, 5e, 6
  • Maximum CAT cable length -  100 m (333 ft)
  • Power consumption in idle -  5 W
  • Power consumption in ISS power-down mode -  4 W
• Dimensions (HxWxD) - 8.9 x 5.94 x 5.59 inch (226 x 151 x 142 mm)
• Weight - 6.83 lb (3.1 kg)

What's in the Box

• 1x 4420A Smart IP Installation Speaker
• 1x simple bracket
• 1x mounting screw set
• 1x 3-position terminal block