Penn-Elcom
-
Penn-Elcom Bar Type Speaker Handle
Recessed Steel Bar Handle. Suits Backplate H1105/BP and Airtight Gasket H1105G Material: 0.9mm / 20 gauge Steel Finish: Black -
Penn-Elcom Amp Cabinet Corner C1824N - Nickel
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Nickel -
Penn-Elcom Large Chevron Stacking Corner
Large Chevron Stacking Corner Internal Radius: 7mm / 1/4" Material: Plastic Finish: Black -
Penn-Elcom Blue Braked Caster - 440lb Rating
Braked Swivel Castor with 100mm / 3.94" Blue Wheel . 27mm / 1" Wide Tyres Carrying Weight per Wheel: 200kg / 440Lb Works with Castor Plate W0094 and universal wheel... -
Penn-Elcom CN01 Deluxe Cage Nut Insertion/Extraction Tool
This tool is invaluable for site engineers wanting to insert or extract Cage Nuts. No more cut fingers with sharp tools and screwdrivers. Suitable for the 8.3mm / 5/16" and... -
Penn-Elcom Road Case Dish for 8x D-Type Connectors
Dish punched for 8 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc.) Zinc Finish -
Penn-Elcom Lift Off 2 Pc Hinge
Life-Off Hinge Material: Steel Finish: Zinc -
Penn-Elcom Piano Hinge
37mm / 1.46" Open Hinge, 1.83m / 72" Length Punched 50.8mm / 2" Centres Material: Steel Finish: Zinc -
Penn-Elcom Amp Cabinet Corner C1823K - Black
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Black -
Penn-Elcom Rubber Feet w/ Steel Insert (Each) - 3/4in
F1686/20 is a large rubber flight case foot. Feet prevent your case from shifting, and help keep your case (and its contents) secure, whether in transit or while in use. Material:... -
Penn-Elcom FT01-Q 1U Rack Fan Unit
The NEW version of the 1U/6U blower unit for use in 19" equipment racks now comes with low noise fans to reduce noise levels from the rack. The quiet fans make it ideal for... -
Penn-Elcom Large Surface Mount Twist Latch.
Large Surface Mount Twist Latch. Spring-Loaded. Material: Steel Finish: Zinc -
Penn-Elcom Rivet Protected Recessed Handle 3/8in dish 3/4in Grip
Rivet Protected Recessed Handle - Double Sprung Material: 1.2mm / 18 gauge Steel Finish: PennBrite -
Penn-Elcom CoolRaC 1U Hot Air Extraction Unit
This is a very quiet 1U Hot Air Extraction Unit, which uses 3 miniature blowers to expel heat from any 19” equipment racks. Behind the 1U Escutcheon, the ergonomic 0.5U... -
Penn-Elcom Swivel Castor - Blue
80mm / 3.15" Castor with Rubber Blue Wheel Carrying Weight per Wheel 80Kg / 176.37Lb Works With Castor Release Plates W0093/NB and W8980 Material: Steel/Rubber -
Penn-Elcom Braked Swivel Castor - Blue
0mm / 3.15" Castor with Rubber Blue Wheel Carrying Weight per Wheel 80Kg / 176.37Lb Works With Castor Release Plates W0093/NB and W8980 Material: Steel/Rubber -
Penn-Elcom Rubber Feet Small Tapered Foot
Small Tapered Rubber Foot with Steel Washer. Non-Marking. Washer Design Helps Eliminate Over-Tightening. Material: Rubber/Steel -
Penn-Elcom Medium Offset Latch In Plain Dish
Medium Latch in Plain Dish Material: 1.2mm / 18 gauge Steel Finish: Zinc -
Penn-Elcom D2101K Blank Dish Black 5x7
Blank Dish in Black. 5" x 7" Constructed of 1.2 mm/0.047" thick steel. -
Penn-Elcom Amp Cabinet Corner C1824K - Black
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Black -
Penn-Elcom Amp Cabinet Corner C1823N - Nickel
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Nickel -
Penn-Elcom Mini Latch in Shallow Plain Dish
Mini Latch in Shallow Plain Dish From Split to Hole Centre: 11mm / 7/16" Material: 1.2mm / 18 gauge Steel Finish: Zinc -
Penn-Elcom Strut Hinge
Small Strut Hinge Material: Steel Finish: Nickel -
Penn-Elcom Sprung Surface Handle w/ 19mm / 3/4" Grip
Sprung Surface Handle, with 19mm / 3/4" Grip. Works with Backplate H1078/BP Material: 1.6mm / 16 gauge Steel Finish: PennBrite