Wireless Accessories
-
Lectrosonics SNA600A Adjustable Dipole Antenna
The SNA600 antenna is a versatile tool for use with wireless microphone receivers or IFB transmitters. The center frequency of its 100 MHz bandwidth is tunable from 550 to 800... -
Lectrosonics ALP690 Active/Passive LPDA Antenna
The ALP690 is a high-performance LPDA (log periodic dipole array) antenna with a bypassable, built-in RF amplifier for use with wireless microphone receivers in location or studio... -
Lectrosonics LTBATELIM Battery Eliminator for LT Transmitters
This battery eliminator replaces the batteries and door on the LT transmitter, allowing the unit to be powered from an external DC source. The battery eliminator is supplied in a... -
Lectrosonics SREXT SR Receiver Mounting Kit
Adapter kit for SR receiver, two TA3 audio output jacks, locking power connector, includes 6' power cord. Has spare mounting screws in dummy holes in adapter. -
Lectrosonics MCSRXLR TA3F to XLRm Cable
15" audio cable for SR receiver, TA3F plug to 3 pin male XLR. -
Lectrosonics ALP620 LPDA Antenna
Skeletal remote antenna for decreased wind loading. The ALP Series antennas are a Log Periodic Dipole Array (LPDA) design that provides a useful directional pattern over a broad... -
Lectrosonics SRSUPER Unislot Adapter Kit for Duopack, Quadpack and Octopack
SRSUPER bottom plate adapter for SR receivers used in SuperSlot docks. This includes: The end plate adapter, blue bezel, gasket and hardware set. See SRDB25 if you just... -
Lectrosonics AMJKIT Whip Antenna
Whip antenna for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Comes with antenna, assorted color caps and cutting... -
Lectrosonics LRBATELIM Battery Eliminator for LR Receivers
This battery eliminator replaces the batteries and door on the LR receiver, allowing the unit to be powered from an external DC source. The battery eliminator is supplied in a kit... -
Lectrosonics LRSHOE LR Shoe Mount
LRSHOE is an accessory shoe for LR or M2R receiver to allowing mounting on DSLR type cameras. -
Lectrosonics AMM-O Coloured Transmitter Antenna Caps
Color coded transmitter antenna caps -
Lectrosonics 35679 Adjustment Tool
Lectrosonics screwdriver and adjustment tool for setting transmitter gain and roll-off pots as well as for setting the frequency switches on some older receivers and transmitters. -
Lectrosonics MC65 1/4in to 3.5mm Adapter Cable
10ft. adapter cable. 1/4" male phone to 3.5 mm mini-phone TRS. -
Lectrosonics 26862 Thumb Screw for Beltclips
Thumb screw for beltclips on the SM transmitters. -
Lectrosonics SRSLEEVE Mounting Sleeve
Mounting sleeve for a SR receiver, includes Velcro. See SRHARDWARE for additional mounting methods. -
Lectrosonics PHTRAN3 HM Leather Pouch
Leather pouch for HM plug-on transmitters -
Lectrosonics SRSNY Sony Mounting Adapter
Mounting adapter to mount SR receivers into slot on Sony cameras. Makes connections with internal Sony connector. Second channel is not be enabled by camera manufacturer. However,... -
Lectrosonics CHSIFBR1B IFBR1B Charging Station
This battery charging station provides a convenient and organized means of recharging any combination of up to 4 LB-50 batteries or IFBR1B receivers. Each charging module may be... -
Lectrosonics AMJ22 Colour Coded Antenna (Freq: Block 22)
Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Construction is of nearly indestructible steel... -
Lectrosonics PALP600 ALP Antenna Pouch
Zippered Cordura pouch for ALP antennas. -
Lectrosonics MC35 Line-Level XLR to TA5F Adapter
Female XLR to female TA5F 5-pin; 37" long; wired for line level input to belt-pack transmitters -
Lectrosonics AMJ19 Colour Coded Antenna (Freq: Block 19)
Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Construction is of nearly indestructible steel... -
Lectrosonics AMJ20 Colour Coded Antenna (Freq: Block 20)
Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Construction is of nearly indestructible steel... -
Lectrosonics RATPAC Right Angle Connection Kit
The RATPAC (Right Angle T connector PACkage) is a versatile kit for building a right angle connector for use with the SR receiver or Lectrosonics transmitters. The 3-pin...