Matthews
-
Matthews Telescoping Hanger with Clamp & Stirrup - 1.5ft - 3ft
Designed for use with light weight fluorescent or other fixtures weighing no more than 25 lbs.(11.4kg.) Engineered to telescope from the grid with nominal ceiling clearance.... -
Matthews C-Riser Section Only - 20in Chrome
20" C+Riser Section Only -
Matthews Telescoping Hanger Extension - 2ft - 6ft
Telescoping Hangers have a very substantial pipe clamp to attach to a lighting grid. The pipe clamp has been slightly offset to allow the riser or drop down tube to slide up when... -
Matthews MICROgrip Rod - 6in
6" MICROgrip 1/4-20 Male to 1/4-20 Female Rod -
Matthews Clip with 1/4in Thread
Use this handy clip to hold just about anything -
Matthews Offset Arm for Round-D-Round Dolly
Secondary Offset Arm for Round-D-Round Doorway Dolly -
Matthews VEEBOXX KIT
VeeBoxxTM kit is a new, portable soft box enclosure that works with The Claw to quickly transform the Astera 40" Titan tube into a diffused lighting source. The Claw &... -
Matthews Knife Blade Gel Frame (48x48)
The flat edges of these frames make them ideal for quick gel changes with 2 sided tape. Image shown is knife blade frame only. 48" x 48" Knife Blade Frame -
Matthews Seat and Riser Assembly for Round-D-Round Dolly
Seat and Riser Assembly for the Round-D-Round Doorway Dolly or the Doorway Dolly, or any other dolly! Junior male pin on the end. -
Matthews 1/4in to 5/8in Adapter Pin
5/8" Baby Pin to 1/4-20 Male Adapter -
Matthews Hollywood Arm 20in - Stainless
20” Stainless Steel Arm Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for fast,... -
Matthews Vice Grip Plier with two 5/8in Pins
The Locking Pliers also provides maximum gripping power on both flat and round surfaces with smaller diameters. EXTREME CAUTION must be taken when the 5/8" pin provided on... -
Matthews Open End Scrim Double Black 18x24
Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the... -
Matthews Midi Vator III Crank Stand
During the past thirty plus years Matthews Studio Equipment has supplied the production community with heavy-duty VATOR cranking stands. From Low Boy VATORS to the SUPER...
-
Matthews Mini Boom Roling Kit
The Mini Boom Rolling Kit was inspired by renowned photo artist, Jeremy Saffer, who says “The Matthews Runway Base with a 40” C+Riser and Mini Boom Arm is a game... -
Matthews C+ Turtle Base - Chrome
Spring Loaded Turtle Base Only -
Matthews 8x8ft Overhead Fabric - Solid Black
8' x 8' Butterflys - Solid -
Matthews 40in Riser Section for C+ Stand
40" three-section extension for C+ light stands. -
Matthews Telescoping Hanger with Clamp & Stirrup - 4ft - 8ft
Designed for use with light weight fluorescent or other fixtures weighing no more than 25 lbs.(11.4kg.) Engineered to telescope from the grid with nominal ceiling clearance.... -
Matthews The Panel Stand
A strong, lightweight crank stand with low profile legs for clearance of long, wide, or low hanging panel lights, balloon lights, large monitors, LED screens, overhead frames, and... -
Matthews Chimera V-Flat Panel Frame Kit
Say goodbye to flimsy foam-core and hello to a smarter, stronger V-Flat system. Designed for photographers, filmmakers, and content creators on the move, the Chimera V-Flat Kit... -
Matthews Cotone Mount Moving Light Stand Adapter
The Moving Light Stand Adapter “Cotone Mount” is a game-changing solution for live production setups, allowing you to mount industry “Mover Lights” to... -
Matthews Apple Box Topper
Say goodbye to uncomfortable seating on set with our fabulous Apple Box Topper – your new favorite seat cushion that turns any standard Full Apple Box size... -
Matthews 15lbs RoadBags (Empty)
RoadBags™ are an essential solution for versatile, portable weight support on set or on location! These fillable black sandbags are crafted from durable black Cordura and...