Matthews
-
Matthews Clip with 1/4in Thread
Use this handy clip to hold just about anything -
Matthews Infinity Arm Tip 3/8-16 Male Thread
The industry standard for attaching and accessorizing larger cameras, monitors, lights, camera cages, and many other industry accessories. The bigger brother to the... -
Matthews BM1 Bulb Mount Kit
The BM1 Bulb Mount Kit enables endless lighting opportunities when it comes to battery powere E26/E27 bulbs. Multiple threaded pins allow your bulbs to interface with... -
Matthews Flag Bag - 48x48in
The Matthews Flag Bags are made of 1000 denier polyester fabric exterior shell with a heavy duty zippered closure and carrying handles. The inside is lined with a corrugated... -
Matthews Back Light Stand
The Matthews Back Light Stand is configured so that accurate positioning of the back light may be achieved. Used for either background illumination or backlighting the subject. An... -
Matthews Hollywood Arm 20in - Stainless
20” Stainless Steel Arm Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for fast,... -
Matthews 1/4in to 5/8in Adapter Pin
5/8" Baby Pin to 1/4-20 Male Adapter -
Matthews 20in C-Stand Punky w/ Mini Base 5.25ft - Chrome
In 1974 Matthews Studio Equipment introduced the industry’s first folding base C-Stand. (C-Stand and Century Stand are registered trademarks of Matthews Studio Equipment,... -
Matthews Vice Grip Plier with two 5/8in Pins
The Locking Pliers also provides maximum gripping power on both flat and round surfaces with smaller diameters. EXTREME CAUTION must be taken when the 5/8" pin provided on... -
Matthews Open End Scrim Double Black 18x24
Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the... -
Matthews Telescoping Hanger with Clamp & Stirrup - 1.5ft - 3ft
Designed for use with light weight fluorescent or other fixtures weighing no more than 25 lbs.(11.4kg.) Engineered to telescope from the grid with nominal ceiling clearance.... -
Matthews Telescoping Hanger Extension - 2ft - 6ft
Telescoping Hangers have a very substantial pipe clamp to attach to a lighting grid. The pipe clamp has been slightly offset to allow the riser or drop down tube to slide up when... -
Matthews MICROgrip Rod - 6in
6" MICROgrip 1/4-20 Male to 1/4-20 Female Rod -
Matthews Midi Vator III Crank Stand
During the past thirty plus years Matthews Studio Equipment has supplied the production community with heavy-duty VATOR cranking stands. From Low Boy VATORS to the SUPER...
-
Matthews Knife Blade Gel Frame (48x48)
The flat edges of these frames make them ideal for quick gel changes with 2 sided tape. Image shown is knife blade frame only. 48" x 48" Knife Blade Frame -
Matthews C+ Turtle Base - Chrome
Spring Loaded Turtle Base Only -
Matthews Offset Arm for Round-D-Round Dolly
Secondary Offset Arm for Round-D-Round Doorway Dolly -
Matthews Seat and Riser Assembly for Round-D-Round Dolly
Seat and Riser Assembly for the Round-D-Round Doorway Dolly or the Doorway Dolly, or any other dolly! Junior male pin on the end. -
Matthews VEEBOXX KIT
VeeBoxxTM kit is a new, portable soft box enclosure that works with The Claw to quickly transform the Astera 40" Titan tube into a diffused lighting source. The Claw &... -
Matthews 8x8ft Overhead Fabric - Solid Black
8' x 8' Butterflys - Solid -
Matthews Mini Boom Roling Kit
The Mini Boom Rolling Kit was inspired by renowned photo artist, Jeremy Saffer, who says “The Matthews Runway Base with a 40” C+Riser and Mini Boom Arm is a game... -
Matthews 40in Riser Section for C+ Stand
40" three-section extension for C+ light stands. -
Matthews The Panel Stand
A strong, lightweight crank stand with low profile legs for clearance of long, wide, or low hanging panel lights, balloon lights, large monitors, LED screens, overhead frames, and... -
Matthews Telescoping Hanger with Clamp & Stirrup - 4ft - 8ft
Designed for use with light weight fluorescent or other fixtures weighing no more than 25 lbs.(11.4kg.) Engineered to telescope from the grid with nominal ceiling clearance....