Matthews
-
Matthews MicroGrip Head - 1.25in
Matthews Grip Heads are the strongest in the business! Set it and forget it...plates feature two holes of 3/8" and 5/8" diameter that eliminate any confusion. New... -
Matthews Gaffer Grip with 5/8 Pins
Mount small light fixtures virtually anywhere with this handy adjustable jaw clamp which clamps objects up to 3 3/4". Your surfaces stay protected with 12 rubber gripper pads... -
Matthews Extendellini
The Extendellini is a 12" extension for a Matthellini or Cardellini center jaw clamp -
Matthews MICROGrip Base
The MICROgrip Base is a 2 lbs base for use with table top shooting. The 4" base has a non-abrasive pad on the bottom to protect the surface. Pair the base with MICROgrip rods... -
Matthews Baby Stand Extension - 18in
When a Baby Lighting fixture needs to be just a little higher, the stand extension can be added to the top of the stand, nail-on plate or other hardware. A light-weight extendable... -
Matthews Hollywood Arm 20in - Black
20” Stainless Steel Arm - Black Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for... -
Matthews Dutti Dolly Universal Stand Bracket
Stand Brackets for Dutti Dolly track -
Matthews Open End Scrim White Artificial Silk 18x24
Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the... -
Matthews Shot Bag - 5lbs
Matthews uses steel shot instead of lead to fill these black cordura bags. Stainless steel and custom shot bags are also available -
Matthews 6in Pin with Collar
Small and easy to keep in that emergency kit, the 6" Pin with Collar can be mounted in a Grip Head, without fear of it slipping through the hole when a light fixture is... -
Matthews Baby Pin to 17mm Adapter
Converts 5/8" male to 17mm female. Also, by reversing the position of the set screw and the T-Handle, can be semi-permanently attached to any snap-in accessory (i.e.... -
Matthews C-Clamp with 2x 5/8 Baby Pins - 4in
Matthews C Clamps are available in 4", 6", 8", 10" and 12" with or without 5/8" mounting pins or Junior Receivers. Each clamp has a steel channel... -
Matthews Cheater Adapter
Eliminate barn door interference with this angled baby pin to 5/8 adapter Features and Benefits Knurled baby pin ensures whatever is being mounted stays put. V-shaped Posi-V-Lock... -
Matthews 5/8in Receiver Mounting Plate
Often used as the foundation for a monitor platform, a speaker platform or for placing product. The plate has a 5/8" receiver for placing directly onto a Baby Stand. The... -
Matthews Infinity Arm 5/8in Baby Pin
Use this tip to mount lights with bale blocks, mount in a grip head, or with anything that has a 5/8" female receiver. -
Matthews Apple Box - Eighth Mini 10x12x1
Use them for propping or leveling, sitting or standing. Nail Wall Plates to them to hold low angle lighting fixtures and multiple other purposes. A Full Apple Box is equivalent to... -
Matthews Infinity Arm 5/8in Female
Used to attach the Infinity Arm to any 5/8" baby pin. Great for using the arm with clamps like the Matthellini Clamp, on stands to hold strobes and other lights or... -
Matthews Gag
Gag Grip Head is the combination of two sets of grip head plates on one shaft, and with one locking knob. -
Matthews Hollywood Arm 40in - Stainless
40” Stainless Steel Arm Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for fast,... -
Matthews Flag - 12x18in
Newly designed 90 degree Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for... -
Matthews Infinity Mafer Cheese Plate Tip
Includes (1) tip, (2) 3/8" bolts and nuts, (2) 1/4-20" bolts and nuts, (2) 10-32" screws Mounts to all standard cheese plates and camera hole patterns with 1"... -
Matthews Snap In Pin - Right Angle 5/8in
For mounting of lighting fixtures. Matthews offers three different sizes to fit most motion picture and still photographic instruments. -
Matthews MICROgrip Rod - 12in
12" MICROgrip 1/4-20 Male to 1/4-20 Female Rod -
Matthews 4.5in Vacuum Cup with 5/8in Pin
Pump it until a red marker disappears to create an amazing bond to non porous surfaces. Also known as Pump Cup or Suction Cup.