ETC Source 4WRD Color II LED Retrofit (Black)

About: ETC Source 4WRD Color II LED Retrofit (Black)

The Source 4WRD Color II LED engine transforms your existing Source Four incandescent profile into an RGBA LED fixture, unlocking the world of additive color mixing, saturated washes, and quick color changes. It means more stage looks with fewer fixtures using less energy and needing less maintenance, all at a compelling price point.

Move 4WRD in Five

It takes less than five minutes to upcycle your Source Four to 4WRD Color II. The Source 4WRD Color II provides a simple, cost-effective, non-destructive retrofit of existing Source Four profile fixtures. You can quickly convert an incandescent Source Four ellipsoidal fixture to an RGBA color-changing luminaire while retaining all the best features of the Source Four.

Where Will You Move 4WRD?

Light, layered: Source 4WRD Color II is a happy companion to other ETC fixtures. The beautiful, theatrical dimming curve blends seamlessly with ColorSource, Desire, and Source Four LED luminaires – but also alongside traditional tungsten fixtures or Source 4WRD II.

The Z Factor

The Source 4WRD Color II retrofit brings you all the features of the Source Four including the ‘Z focus' or peak adjustment knob. With the Z focus knob you can project patterns with perfectly flat fields or blended washes with nuanced falloff.

SOURCE

• Nichia LEDs
• 6,042 / 5,051 / 5,687 Max lumens
• 42.2 / 46.3 / 45.9 Lumens per watt
• L70 rating (hours to 70% output): >60,000 hours*

COLOR

• Colors used: RGB-A (Red, Green, Blue and Amber)
• Color temperature range 2,200–6,500 K
• Calibrated array
• No red shift

OPTICAL

• Swappable lens tubes between 5-90 degrees
• 79 mm Gate size
• Aperture size: lens dependent
• Pattern projection
• A or B Pattern size
• 1.2 K and 20 K Camera flicker control/ Hz range

ELECTRICAL

• 100-240 VAC 50/60 Hz power input
• 150 W draw at full
• Maximum of 10 fixtures per non-dimmed circuit (R20 module)
• Requires power from a non-dimmable source.
• Inrush:
  • 120 V: 32 A (first half-cycle)
  • 240 V: 60 A (first half-cycle)

THERMAL

• Ambient operating temp: 5°–50° C (41°–104° F)
• Fan (controllable)
• No Droop compensation
• 27 dBa average at 1 m
• 458 BTUs/hour (120 V)
• 449 BTUs/hour (240 V)

CONTROLS

• DMX / RDM via RJ45
• RDM configuration
• UI type: Seven-segment
• 12 Onboard presets
• 5 Onboard sequences
• No onboard effects
• Fixture-to-fixture control