Clamps & Safety Cables
-
Astera AX1-WP Wing Plate for AX1 and Titan Tube
A mounting holder for 2 AX1-H (not included) with backside 1/4”-20 (babyplug) thread AX1-H and Babypin not included -
Astera AX1-H Holder
Metal Holder to screw onto surfaces and attach the AX1 and Titan Tube. -
Astera AX1-STD Metal Stand for the AX1 PixelTube
Metal Stand to stand the AX1 upright onto stages, at entrances or behind fabric. -
Astera AX1-CP Crossplate for the AX1
Up to 4 WingPlates can be mounted in parallel onto one CrossPlate so 4 tubes can be mounted in parallel onto one cross plate. To hold the additional weight of the CrossPlate has a... -
Astera AX1 Eyebolt
The AX1 Eye bolt (AX1-EBLT) is an M5 stainless steel lifting eyebolt. The eye bolt threads into either end of the AX1 PixelTube or FP1 Titan pixel tube for either hanging or... -
Astera Track Pin
Babypin with a single-stud fitting to work with airline tracks. -
Astera M5 EyeBolt
EyeBolt with M5 thread that works with Astera’s tubes and a wide range of other Astera products. Also used as safety mounting point for tubes. For suspending AX1 Pixel Tube,... -
Astera AX1-BLT Double-ended Spigot 3/8 & 1/4 Baby Pin
Double-ended Spigot to attach the AX1 Metal Holder to Manfrotto clamps and other threads. 3/8" thread at one end and 1/4"-20 thread on the other end. -
Astera PixelBrick Accessory Kit
Kit of additional accessories to get the most out of your PixelBricks. Stored in a durable protective plastic case. Together with the PixelBrick Kit, this enables you to build... -
Astera PB15-BHI BrickHinge
Connect 2 PixelBricks, angle them to spread their beam and to create shapes. Compatible With: PB15 PixelBrick -
Astera FP5-PSH PowerStation Hangers for FP5-PS (8-Pack)
Set of 8 PowerStation Hangers for FP5-PS with single stud fitting to connect to the PowerStation's airline track. Used for suspending NYX Bulb PowerStation Can be attached via... -
Astera PB15-BBR BrickBracket
Essential grip for mounting Astera tubes to walls, truss and other structures. Compatible With: PB15 PixelBrick -
Astera PB15-BTLT BrickTilt
Connect 2 PixelBricks, tilt them to spread their beam and to create shapes. Compatible With: PB15 PixelBrick -
Astera PB15-BMO BrickMount
Slide into the PixelBrick‘s side to connect mounting tools through 1/4“-20 and M5 threads. Compatible With: PB15 PixelBrick -
Astera FP2 Helios Handle
The Helio handle can be screwed onto the Helios Tube so that it can be held and aimed at people or objects when filming. The handle has a babyplug attached so that is can be...