Clamps & Safety Cables
-
The Light Source Mega Slim Coupler 3/8″ × 1″ Hex Cap Screw - Silver
The Mega Slim Coupler is a lower profile option for smaller light fixtures. It is half the size of our standard Mega-Coupler and weighs 30% less; yet fits the same as the... -
The Light Source Mini-Clamp - Black Anodized (Short Handle)
The Mini-Clamp is perfect for PAR 38’s, Pin Spots, and other small fixtures. The clamp is made from an aircraft grade aluminum extrusion with micro-grooves that conform to... -
The Light Source Micro-Clamp- Black
The Micro Clamp is ideal for hanging miniature fixtures like MR-16’s onto a small pipe or tube. Made from high tensile aircraft aluminum. Solid design grips pipe with micro... -
The Light Source Mini-Clamp - White Powder Coat
The Mini-Clamp is perfect for PAR 38’s, Pin Spots, and other small fixtures. The clamp is made from an aircraft grade aluminum extrusion with micro-grooves that conform to... -
The Light Source Mega-Coupler w/ 1/2 Inch Flat Head Bolt - Silver
This Mega-Coupler replaces the standard Hex Head bolt with a flat head countersunk bolt. Available with a 1/2" flat head base or a 3/8" flat head base to fit a flat head... -
The Light Source Mega-Coupler - Silver w/ Steel Wingnut
The Mega-Coupler has a 1/2″ × 1 1/4" Hex Head Bolt with The Light Source Wing Nut. Our Mega-Coupler has solid nut tabs that won’t break off. It uses... -
The Light Source Barco Projector Clamp - Silver
The TC-Barco Projector Clamp will fasten from 2" OD to 1.5" OD Tube. Has a 2-1/2" T-Handle so no tools are required to fasten to the pipe. Over 2" of... -
Nanlite Foldable Floor Stand For PavoTube
The Nanlite Foldable Floor Stand For PavoTube II 15X and 30X LED Pixel Tubes is a fast and portable support designed to enable PavoTube II 15X and 30X's to stand vertically. A... -
The Light Source Safety-Clamp - Black
Perfect for high catwalks and educational facilities with less experienced crews. Snaps onto the pipe with a carabineer style latch and cannot fall off. (except off the end of the... -
The Light Source Mega-Swivel - Black
Pan locking bolt style theatrical C-Clamp. Fixture is bolted to, and rotates on retained steel post in clamp body. Comes with half inch fasteners. Minimum Size 1" pipe,... -
The Light Source Slim Claw - Black
The Slim-Claw will fasten to both 1-1/2 Schedule 40 pipe (1.90 OD) and 2 OD truss tube. The Claw has a 3-1/2 T-handle so no tools are required to fasten to the pipe. Comes with 1... -
The Light Source Coupler w/Eye Nut - Silver
he Mega-Coupler w/Eye Nut has a Forged Steel Eye Nut for making rigging connections from a pipe or truss. The Forged Eye Nut is secured to the Mega-Coupler with a 1/2"... -
The Light Source Slim Claw - Silver
The Slim-Claw will fasten to both 1-1/2 Schedule 40 pipe (1.90 OD) and 2 OD truss tube. The Claw has a 3-1/2 T-handle so no tools are required to fasten to the pipe. Comes with 1... -
The Light Source Purlin Clamp 3/8in Bolt - Black
The Purlin Clamp is perfect for installing almost anything to bar joists, purlins and I-beams up to 1" thick. The Purlin Clamp is available with 3/8"-16 tpi fasteners.... -
The Light Source Mega-Coupler w/ 3/8 Inch Flat Head Bolt - Silver
This Mega-Coupler replaces the standard Hex Head bolt with a flat head countersunk bolt. Available with a 1/2" flat head base or a 3/8" flat head base to fit a flat head... -
The Light Source Mini-Clamp - Silver (Short Handle)
The Mini-Clamp is perfect for PAR 38’s, Pin Spots, and other small fixtures. The clamp is made from an aircraft grade aluminum extrusion with micro-grooves that conform to... -
The Light Source Barco Projector Clamp - Black
The TC-Barco Projector Clamp will fasten from 2" OD to 1.5" OD Tube. Has a 2-1/2" T-Handle so no tools are required to fasten to the pipe. Over 2" of... -
The Light Source Mega-Swivel - Silver
Pan locking bolt style theatrical C-Clamp. Fixture is bolted to, and rotates on retained steel post in clamp body. Comes with half inch fasteners. Minimum Size 1" pipe,... -
The Light Source TC Clamp Swivel - Black
The TC CLamp will fasten two 2" OD to 1.5" OD tubes together. The TC Clamp has two 2-1/2" T-handles so no tools are required to fasten to the pipe. Safe Vertical... -
The Light Source Mega-Claw - Silver
The new standard for hanging intelligent lighting fixtures. Allows one man to hang intelligent fixtures. Simply flip the link up, place clamp over the pipe and the Mega-Claw holds... -
The Light Source Mega-Coupler w/ 3/8 Inch Flat Head Bolt - Black
This Mega-Coupler replaces the standard Hex Head bolt with a flat head countersunk bolt. Available with a 1/2" flat head base or a 3/8" flat head base to fit a flat head... -
The Light Source Micro-Clamp- Silver
The Micro Clamp is ideal for hanging miniature fixtures like MR-16’s onto a small pipe or tube. Made from high tensile aircraft aluminum. Solid design grips pipe with micro... -
The Light Source Monstro-Clamp - Black
The Monstro-Clamp 4" fastens to those really big, (2-3/8" OD to 4" OD), pipes. CNC cut from solid one inch thick aluminum plate. 1/2"-13 × 4″... -
The Light Source Mega-Claw - White Poweder Coar
The new standard for hanging intelligent lighting fixtures. Allows one man to hang intelligent fixtures. Simply flip the link up, place clamp over the pipe and the Mega-Claw holds...