Lectrosonics
-
Lectrosonics M152/5P Omnidirectional Lav Mic - TA5F
The M152 is a high performance microphone with heavily suppressed mechanical noise for critical applications. A wide, flat frequency response is augmented by a 2 or 3 dB bump in... -
Lectrosonics M152/SM5P Omnidirectional Lav Mic w/ Boot
High-performance omnidirectional lav mic, 5-pin plug with water/dust sleeve. The M152 is a high performance microphone with heavily suppressed mechanical noise for critical... -
Lectrosonics M152/WP Water-tight Lav Mic - Micro
High-performance omnidirectional sweat and water resistant lav mic with sealed 2.5mm micro (WP series) plug for WM and MM400 series transmitters. Not intended for full... -
Lectrosonics MCTA6XLRF2 Dual XLRF to TA6FLX Line Level Adapter Cable
This cable is used to connect the input of the Lectrosonics Digital Camera Hop Transmitter to the analog output of a mixer or receiver. It is constructed with a TA6FLX jack, ultra... -
Lectrosonics SR9VBP Dual 9V Battery Holder
This optional adapter provides reliable power and backup from 9 volt alkaline or rechargeable batteries. It mounts onto the battery sled with the same connections as the... -
Lectrosonics Audio Output and Power Adapter Panel for SR Receiver
The two balanced audio outputs and the power cable are secured to the panel with rugged strain reliefs. Cables are 6 feet long and audio cables are shielded. No connectors... -
Lectrosonics MCTA6TA5M2 Dual TA5M to TA6FLX Mic/Line Level Adapter Cable
Mic or line audio interface cable intended to connect a Lectrosonics DCHT (Digital Camera Hop Transmitter) input from a mixer or receiver output configured for unbalanced mode. ... -
Lectrosonics MCTA6TA3F2 Dual TA3F To TA6FLX Line Level Adapter Cable
This cable is typically used to connect the output of a mixer or receiver with TA3M connectors to the line level input of a Lectrosonics transmitter with a TA6 connector. A common... -
Lectrosonics MCTA5TA3F2 TA5F to two TA3F Audio Cable
Audio cable for portable digital receivers, TA5F to two TA3F connectors, 18” cable. For two analog balanced receiver outputs, or two AES digital pairs (four audio channels),... -
Lectrosonics DSR4EXTUSB Bottom Plate Adaptor
This kit includes an output and power panel with two TA5 male balanced output pairs, and a locking Hirose-4 DC power jack. A USB-C jack allows for connection of the DSR4 to... -
Lectrosonics HH2SEN Transmitter Adapter for Sennheiser G2, G3 and 2000
This adapter allows mounting microphone capsules designed for G2, G3 and 2000 Series Sennheiser wireless transmitters on the Lectrosonics HH transmitter. -
Lectrosonics HHXTND Extender for HH Transmitters
Extender for mic flag which allows for access to LCD screen and talkback button.