Lectrosonics
-
Lectrosonics MCSRXLR TA3F to XLRm Cable
15" audio cable for SR receiver, TA3F plug to 3 pin male XLR. -
Lectrosonics DCR15/4AU DC Power supply
DC Power supply, 15V, 4.2A. incl. AC power cord Compatible with DSR4, DSR, URC, SRC, DCR4, SMBATELIM, LTBATELIM, DR, VRM2WB -
Lectrosonics M119/MC Omni Lavalier Mic - Micro Connector
The Lectrosonics M119 microphone exhibits a broad, flat frequency response well suited to tape recording or speech reinforcement applications. The omnidirectional pickup pattern... -
Lectrosonics MC35 Line-Level XLR to TA5F Adapter
Female XLR to female TA5F 5-pin; 37" long; wired for line level input to belt-pack transmitters -
Lectrosonics DCR5/9AU Power Supply
Power supply for the CHSIFBR1B and CHSDSSM 4-bay battery and receiver charger. A single DCR5/9AU power supply can power up to four CHSIFBR1B charging bays at once, allowing... -
Lectrosonics MC49 TA3F to TA5F Adapter Cable
12" Cord, TA3F to TA5F, line level. -
Lectrosonics MC41 XLR to TA5F Adapter
Adapter cable, 37", mic level, XLRF to TA5F for all 5 pin transmitters. -
Lectrosonics M140MC Cardioid Lavalier Mic - Micro Connector
The Lectrosonics M140 is characterized by a bright overall sound, due to the nature of the directional pickup pattern. The M140 is not recommended for use in windy conditions... -
Lectrosonics MC40 Mic-Level XLR to TA5F Adapter
37" adapter cable, mic level, XLRF to TA5F. Wired for dynamic mic input to transmitters with earlier type 5-pin, non-servo inputs. This would be the older UM200 and UM400... -
Lectrosonics MC44 1/4in to Micro Adapter Cable
Adapter cable, 37", male 1/4" mono plug to male locking micro plug. -
Lectrosonics MCSR/5PXLR5P TA5 to 5-pin XLRM Adapter Cable for SR Receivers
Audio cable for SR-type receivers, rotatable right angle TA5 to 5-pin male XLR. 25" cable. -
Lectrosonics MCA-M30 Barrel Adapter
The MCA-M30 Barrel Adapter is used to correct powering and noise is- sues that can occur when measurement microphones are used with Lectrosonics UH and HM Series plug-on... -
Lectrosonics SRDB25 Unislot Adapter for Duopack, Quadpack and Octopack
The SRDB25 adapter is compatible with SR Series Receivers including: Octopack Quadpack Duopack Cameras with Unislot connection Superslot compatible The adapter is... -
Lectrosonics End Plate Connector Kit for Superslot Sockets
DSR4 Superslot adapter connector plate for Sound Devices SL-2. This includes the adapter plate only with the two mounting screws. No mounting bezel included -
Lectrosonics MI33PRA TA5F to Right-Angled 1/4-inch Passive Instrument Cable
Musical Instrument cable, ¼” right angle phone plug to TA5F. No internal DI, used with active, high-output pickup systems with any Lectrosonics TA5 input transmitter,... -
Lectrosonics MI33PST TA5F to 1/4-inch Passive Instrument Cable
Musical Instrument cable, ¼” straight phone plug to TA5F. No internal DI, used with active, high-output pickup systems with any Lectrosonics TA5 input transmitter, or... -
Lectrosonics MCSRXLRF TA3F to 3-Pin XLRF Audio Cable
12" audio cable, TA3F plug to 3 pin female XLR -
Lectrosonics RMPM2T-1 Single Rack Mount Kit for M2T and DSQD
The M2T transmitter occupies a half rack space. This kit provides the hardware needed to mount one M2T or DSQD into a single rack space. What's Included Technical Data Sheet... -
Lectrosonics MCAES3 TA5F to 3-Pin XLR Female Digital Audio Adapter Cable
This cable is used to connect the AES output of a digital mixer or recorder to the AES input of the Lec- trosonics SPDR portable recorder. It is constructed with a TA5F jack,... -
Lectrosonics MCSR/5PXLR1 Adapter Cable for SR Series Receivers - Single XLRM
Designed specifically for the front 5-pin output jacks on SR/5P and SRa5P receivers. The most common applications are with the cameras that have a wireless receiver slot,... -
Lectrosonics MCTA6PT TA6F to Dual Pigtails Adapter Cable
This cable is used to connect the input of the Lectrosonics DCHT Digital Camera Hop Transmitter. It is constructed with a TA6FLX jack, ultra-flexible cable and 2 stripped, tinned... -
Lectrosonics MC51 TA3F TO 1/4in Male Line Level Adapter Cable
This cable is primarily used to connect the output of a Lectrosonics receiver, such as the model LR, to guitar effects pedals. It is constructed with a TA3 jack, rugged 3-wire... -
Lectrosonics MCSRPT TA3F Plug to Stripped Tinned Leads for SR Receivers
15" audio cable for SR Receiver. TA3F plug to stripped, tinned leads. -
Lectrosonics REFUMCABLE Connecting Cable for Mute Switch
Connecting cable for mute switch. It is used between the switch and the transmitter