SKB iSeries Case the Blackmagic Design Pocket Cinema Camera 6K Pro
Model: 3i-13096-6KP
About: SKB iSeries Case the Blackmagic Design Pocket Cinema Camera 6K Pro
The iSeries 3i-13096-6KP features a custom foam interior that's been form cut to accommodate the Blackmagic Design Pocket Cinema Camera 6K Pro or Pocket Cinema Camera 6K G2 with lens attached, one additional lens slot, two battery pockets, two SDHC memory card slots, and a compartment for accessories. Lens attached to camera can be up to 7.25" long with a diameter of 3.375" when foam divider is removed. With the foam divider left in, lenses can be up to 5.25" long with a diameter of 3.375". The foam divider left in creates an additional accessory compartment that is 4.25" x 2" x 4.5". The extra lens slot has a diameter of 3.5" and a max depth of 4.75". The extra lens slot comes with two .5" thick ring pads to accommodate shorter lenses. With both ring pads installed the depth changes from 4.75" to 3.75". The main accessory pocket measures 4" x 2.375" x 4.5".
All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).
Features
- Custom cut foam interior for Blackmagic Design Pocket Cinema Camera 6K Pro or Pocket Cinema Camera 6K G2
- Lens slot, battery compartments, memory card slots, and accessory pocket
- Ultra high-strength polypropylene copolymer resin shell
- Resistant to UV, solvents, corrosion, fungus, and impact damage (MIL-STD 810G)
- Complete gasket seal makes the case watertight
- Automatic ambient pressure equalization valve (MIL-STD 810G)
- Molded-in hinges
- Patented Trigger Latch® System
- Accepts SKB's TSA combination padlocks
- Rubber over-molded cushion grip handle
- Unconditional lifetime warranty
Specifications
- Exterior - Hard
- Product Weight - 5.3 lb / 2.40 kg
- Exterior Length - 14.73 in / 37.41 cm
- Exterior Width - 11.94 in / 30.33 cm
- Exterior Height - 7.31 in / 18.57 cm
NOTE: Case only, camera and accessories not included.
UPC: 789270003781
Videos: SKB iSeries Case the Blackmagic Design Pocket Cinema Camera 6K Pro
Reviews: SKB iSeries Case the Blackmagic Design Pocket Cinema Camera 6K Pro
Warranty: SKB iSeries Case the Blackmagic Design Pocket Cinema Camera 6K Pro
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
SKB brand hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it.
SKB Soft Products (cases and interiors) are fully warranted to the original owner against defects in materials and craftsmanship for one year from purchase. Cubed foam interiors are not covered.
Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered
For Quebec Residents - Disclosure under the Consumer Protection Act
In compliance with Bill 29, AVShop.ca and SKB do not guarantee the availability of replacement parts, repair services, or maintenance information for any products. Any applicable manufacturer warranties will remain in place.
