SKB iSeries Case for the Canon R5C Cinema Camera
Model: 3i-1711-R5C
About: SKB iSeries Case for the Canon R5C Cinema Camera
The iSeries 3i-1711-R5C features a custom, high-quality foam interior that’s form cut to accommodate the Canon R5C Cinema Camera with additional pockets for two LP-E6NH batteries, LC-E6 battery charger, RF24-70mm f/2.8 L IS USM lens, Tascam CA-XLR2d-C Mic Adapter, and large accessory pocket. The accessory pocket measures 10.375” x 4.25” x 4” and is perfect for the power supply, an additional lens, cables, or other accessories. The lens slot was designed around the Canon RF24-70mm f/2.8 L IS USM lens, but can fit other similar-sized lenses such as the Canon RF24-105mm. The lens cutout is 6.25” long. The width is 2.75” near the lens mount, 3.5” for the body of the lens and 4.125” for the lens hood section. The depth is 3.5” in the body of the lens and 3.75” where the lens hood goes on the lens reversed.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810G), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810G).
Features
- Fits the Canon R5C Cinema Camera and accessories
- Room for two Lp-E6NH batteries, LC-E6 battery charger, RF24-70mm f/2.8 L IS USM lens, and Tascam CA-XLR2d-C mic adapter
- Accessory pocket measures 10.375" x 4.25" x 4"
- Unconditional Lifetime Warranty
- Molded of ultra high-strength polypropylene copolymer resin
- Resistant to UV, solvents, corrosion, fungus, and impact damage (MIL-STD 810G)
- Waterproof with complete gasket seal
- Automatic ambient pressure equalization valve (MIL-STD 810G)
- Molded-in hinge
- Rubber over-molded cushion grip handle
- Locking loops for customer supplied lock
- Patented Trigger Latch® System
Specifications
- Exterior - Hard
- Product Weight - 7.2 lb / 3.27 kg
- Exterior Length - 18.25 in / 46.36 cm
- Exterior Width - 14 in / 35.56 cm
- Exterior Height - 7 in / 17.78 cm
NOTE: Case only, camera and accessories not included.
UPC: 789270005457
Videos: SKB iSeries Case for the Canon R5C Cinema Camera
Reviews: SKB iSeries Case for the Canon R5C Cinema Camera
Warranty: SKB iSeries Case for the Canon R5C Cinema Camera
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
SKB brand hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it.
SKB Soft Products (cases and interiors) are fully warranted to the original owner against defects in materials and craftsmanship for one year from purchase. Cubed foam interiors are not covered.
Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered
For Quebec Residents - Disclosure under the Consumer Protection Act
In compliance with Bill 29, AVShop.ca and SKB do not guarantee the availability of replacement parts, repair services, or maintenance information for any products. Any applicable manufacturer warranties will remain in place.
