SKB iSeries 1309 Blackmagic Pocket Cinema Camera 4K Case
Model: 3I-13096PC4K
About: SKB iSeries 1309 Blackmagic Pocket Cinema Camera 4K Case
This military-grade waterproof hard case was designed for photographers who just want to carry the essentials. The case interior features a custom cut, high-quality PE foam that provides space for a Blackmagic Design Pocket Cinema Camera 4K with lens attached, lens hood section, two lens slots, and an accessory compartment. A removable section of foam will allow for a longer lens to remain attached to the camera. Each lens slot has three (3) half-inch removable rings to fit a variety of lenses. The size of each lens slot is 3" in diameter and 4.5" in depth, with all rings removed. The 3i-13096PC4K case provides the ultimate protection for essential photo gear and is backed by SKB's unsurpassed Lifetime Warranty.
All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, and feature a gasket-sealed, water and dust tight, submersible design (MIL-C-4150J / IP67). Other standard features include a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810G).
Features
- Custom cute PE foam to fit the Blackmagic Pocket Cinema Camera 4K with a longer lens attached, lens hoods, two lenses, and accessories
- Unconditional Lifetime Warranty
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion, fungus, and impact-resistant (MIL-STD-810G)
- Complete gasket seal makes this case absolutely watertight (MIL-STD-C4150J / IP67)
- Automatic ambient pressure equalization valve (MIL-STD-648C)
- Molded-in hinge
- Rubber over-molded cushion grip handle
- Locking loops for a customer-supplied padlock
- Trigger release latches
Specifications
- Exterior Length: 14.75 in / 37.47 cm
- Exterior Width: 12.00 in / 30.48 cm
- Exterior Depth: 7.25 in / 18.42 cm
- Product Weight: 5.20 lb / 2.36 kg
Camera and accessories not included
UPC: 789270012035
Reviews: SKB iSeries 1309 Blackmagic Pocket Cinema Camera 4K Case
Warranty: SKB iSeries 1309 Blackmagic Pocket Cinema Camera 4K Case
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
SKB brand hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it.
SKB Soft Products (cases and interiors) are fully warranted to the original owner against defects in materials and craftsmanship for one year from purchase. Cubed foam interiors are not covered.
Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered
