Rack Hardware
-
Penn-Elcom CN01 Deluxe Cage Nut Insertion/Extraction Tool
This tool is invaluable for site engineers wanting to insert or extract Cage Nuts. No more cut fingers with sharp tools and screwdrivers. Suitable for the 8.3mm / 5/16" and... -
Penn-Elcom Rubber Feet w/ Steel Insert (Each) - 1in
F1686/25 is a large rubber flight case foot. Feet prevent your case from shifting, and help keep your case (and its contents) secure, whether in transit or while in use. Material:... -
Penn-Elcom Bar Type Speaker Handle
Recessed Steel Bar Handle. Suits Backplate H1105/BP and Airtight Gasket H1105G Material: 0.9mm / 20 gauge Steel Finish: Black -
Penn-Elcom Lift Off 2 Pc Hinge
Life-Off Hinge Material: Steel Finish: Zinc -
Penn-Elcom Piano Hinge
37mm / 1.46" Open Hinge, 1.83m / 72" Length Punched 50.8mm / 2" Centres Material: Steel Finish: Zinc -
Penn-Elcom Amp Cabinet Corner C1823K - Black
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Black -
Penn-Elcom Rubber Feet w/ Steel Insert (Each) - 3/4in
F1686/20 is a large rubber flight case foot. Feet prevent your case from shifting, and help keep your case (and its contents) secure, whether in transit or while in use. Material:... -
Penn-Elcom Rivet Protected Recessed Handle 3/8in dish 3/4in Grip
Rivet Protected Recessed Handle - Double Sprung Material: 1.2mm / 18 gauge Steel Finish: PennBrite -
Penn-Elcom Large Surface Mount Twist Latch.
Large Surface Mount Twist Latch. Spring-Loaded. Material: Steel Finish: Zinc -
Penn-Elcom Amp Cabinet Corner C1824N - Nickel
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Nickel -
Penn-Elcom Rubber Feet Small Tapered Foot
Small Tapered Rubber Foot with Steel Washer. Non-Marking. Washer Design Helps Eliminate Over-Tightening. Material: Rubber/Steel -
Penn-Elcom Large Chevron Stacking Corner
Large Chevron Stacking Corner Internal Radius: 7mm / 1/4" Material: Plastic Finish: Black -
Penn-Elcom Medium Offset Latch In Plain Dish
Medium Latch in Plain Dish Material: 1.2mm / 18 gauge Steel Finish: Zinc -
Penn-Elcom D2101K Blank Dish Black 5x7
Blank Dish in Black. 5" x 7" Constructed of 1.2 mm/0.047" thick steel. -
Penn-Elcom Strut Hinge
Small Strut Hinge Material: Steel Finish: Nickel -
Penn-Elcom Amp Cabinet Corner C1824K - Black
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Black -
Penn-Elcom Small Briefcase Rubber Foot
Diameter: 17.5mm / 11/16" Height: 10mm / 3/8" Small Briefcase Rubber Foot Material: Black Rubber -
Penn-Elcom Amp Cabinet Corner C1823N - Nickel
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Nickel -
Penn-Elcom Sprung Surface Handle w/ 19mm / 3/4" Grip
Sprung Surface Handle, with 19mm / 3/4" Grip. Works with Backplate H1078/BP Material: 1.6mm / 16 gauge Steel Finish: PennBrite -
Penn-Elcom Mini Latch in Shallow Plain Dish
Mini Latch in Shallow Plain Dish From Split to Hole Centre: 11mm / 7/16" Material: 1.2mm / 18 gauge Steel Finish: Zinc -
Penn-Elcom Plastic Corner
Plastic Corner Material: Plastic Finish: Black -
Penn-Elcom Low Mount Latch in Plain or Offset Dish
Low Mount allows you to Hook the Latch on the Edge of the Dish to avoid damage to the latch when open. Material: 1.2mm / 18 gauge steel Finish: PennBrite -
Penn-Elcom Medium Non-Offset Latch In Plain Dish
Medium Latch in Plain Dish Material: 1.2mm / 18 gauge Steel Finish: Zinc -
Penn-Elcom Medium Duty Draw Bolt Lockable Latch
Medium Duty Draw Bolt Lockable Latch Material: Steel Finish: Nickel