Rack Hardware
-
Penn-Elcom Large Surface Mount Twist Latch.
Large Surface Mount Twist Latch. Spring-Loaded. Material: Steel Finish: Zinc -
Penn-Elcom Amp Cabinet Corner C1824N - Nickel
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Nickel -
Middle Atlantic Cage Nuts 10-32 - 50-Pack
Cage nuts fit our cage-nut style rackrail and are available for use with 10-32 and 6mm rack screws to accommodate slide out servers. Includes 50 pieces of 10-32 threaded cage nuts... -
Penn-Elcom Rubber Feet Small Tapered Foot
Small Tapered Rubber Foot with Steel Washer. Non-Marking. Washer Design Helps Eliminate Over-Tightening. Material: Rubber/Steel -
Penn-Elcom Large Chevron Stacking Corner
Large Chevron Stacking Corner Internal Radius: 7mm / 1/4" Material: Plastic Finish: Black -
AVShop Torx Rack Screws (100-Pack)
100 pieces of 10-32 X 0.75" security rack screws prevent loosening and tampering. -
Penn-Elcom Medium Offset Latch In Plain Dish
Medium Latch in Plain Dish Material: 1.2mm / 18 gauge Steel Finish: Zinc -
Penn-Elcom D2101K Blank Dish Black 5x7
Blank Dish in Black. 5" x 7" Constructed of 1.2 mm/0.047" thick steel. -
Penn-Elcom Strut Hinge
Small Strut Hinge Material: Steel Finish: Nickel -
Penn-Elcom Amp Cabinet Corner C1824K - Black
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Black -
Odyssey European 1U Rack Rail Kit for DJ Cases
European 1U rack rail kit for DJ cases. Includes a pair of 1U (1.75″) rails with case mounting hardware. (4 rack screws and nuts are included) NOTE: If you need... -
Penn-Elcom Small Briefcase Rubber Foot
Diameter: 17.5mm / 11/16" Height: 10mm / 3/8" Small Briefcase Rubber Foot Material: Black Rubber -
Kramer 19−inch Rack Adapter for VIA Campus
19−inch rack adapter for mounting a VIA Campus and power supply in a 2U rack space. Capacity - Holds one VIA Campus unit with its power supply.... -
Penn-Elcom Amp Cabinet Corner C1823N - Nickel
Cabinet Corner. Internal Radius: 12mm / 1/2" Material: 0.9mm / 20 gauge Steel Finish: Nickel -
Penn-Elcom Sprung Surface Handle w/ 19mm / 3/4" Grip
Sprung Surface Handle, with 19mm / 3/4" Grip. Works with Backplate H1078/BP Material: 1.6mm / 16 gauge Steel Finish: PennBrite -
Penn-Elcom Mini Latch in Shallow Plain Dish
Mini Latch in Shallow Plain Dish From Split to Hole Centre: 11mm / 7/16" Material: 1.2mm / 18 gauge Steel Finish: Zinc -
Penn-Elcom Plastic Corner
Plastic Corner Material: Plastic Finish: Black -
Penn-Elcom Low Mount Latch in Plain or Offset Dish
Low Mount allows you to Hook the Latch on the Edge of the Dish to avoid damage to the latch when open. Material: 1.2mm / 18 gauge steel Finish: PennBrite -
Penn-Elcom Medium Non-Offset Latch In Plain Dish
Medium Latch in Plain Dish Material: 1.2mm / 18 gauge Steel Finish: Zinc -
Penn-Elcom Medium Duty Draw Bolt Lockable Latch
Medium Duty Draw Bolt Lockable Latch Material: Steel Finish: Nickel -
Penn-Elcom Rivet Protected Recessed Handle with Extended Grip
Rivet Protected Recessed Handle with Extended Grip - Double Sprung 150Kg / 330.69Lb carrying capacity. Suits H1905 and H1065/BP Backplate Material: Steel Finish: Pennbrite -
Penn-Elcom Rivet Protected Recessed Handle 5/8 DISH 3/4" GRIP
Rivet Protected Recessed Handle - Double Sprung Material: 1.2mm / 18 gauge Stee Finish: PennBrite -
Penn-Elcom 2 Hole Small Brace with Rivet Protectors
2 Hole Small Brace with Rivet Protectors. Internal Radius: 3mm / 1/8" Material: 1.2mm / 18 gauge Steel Finish: Zinc -
Penn-Elcom Pre Punched 2.82 Inch utility hinge
Pre-Punched Hinge. Material: 1.2mm / 18 gauge Steel Finish: Zinc