Power Accessories
-
Sale
Anton Bauer MATRIX Cheese Plate
Universal Mounting Plate for rail mounted cameras. Need to order appropriate Rod Clamp Kit (15mm or 19mm). -
Anton Bauer PowerTap Multi - Male PowerTap to Four Female PowerTap Receptacles
Male PowerTap to 4 Female PowerTap receptacles. Expands any Gold Mount PowerTap to accommodate up to four separate devices. Perfect for powering multiple wireless receivers,... -
Anton Bauer Female PowerTap Kit - 12 VDC light to PowerTap
Kit includes Female PowerTap components, pins and housing (cable not included) -
Anton Bauer XLR-4 4-Pin XLR Male to 4-Pin XLR Female Power Cable - 10 ft
4-pin XLR cable to power accessories from VCLX, DT500X or other devices. -
Anton Bauer PowerTap Kit - Male Pins and Housings for PowerTap Connection
Kit includes Male PowerTap components, pins and housing (cable not included) -
Anton Bauer Gold Mount Power Solution for the Phantom FLEX4K
The QRC-FLEX 4K Gold Mount® installs quickly on the Vision Research Phantom FLEX4k camera for use with Anton/Bauer DIGITAL and Logic Series® batteries. A single... -
Anton Bauer QR-HOTSWAPGM Hot-Swap Battery Plate
Mounts directly to any Gold Mount on the camera for true perpetual, battery operation. Unlike "stacking" batteries one behind the other, electronics in the QR-HOTSWAP-GM... -
Anton Bauer Universal V-Mount Battery Bracket
Universal V-Mount bracket for use in various applications using V-Mount batteries. Includes a 10A PowerTap -
Anton Bauer QR-UNIV Universal Gold Mount Battery Adapter - 20" 4-Pin XLR Cable
The QR-UNIV consists of an Anton/Bauer Gold Mount and a 20” integral cable with 4 pin right angle XLR connector. Ideal for powering any portable video equipment with a 4 pin... -
Anton Bauer PowerTap-20 20" PowerTap to Female 4-pin XLR Cable
A 20 inch long cable for connecting a camera mounted Ultralight 4 pin XLR to the PowerTap receptacle on the Gold Mount of any size camera or one-piece camcorder. -
Anton Bauer QRC-GOLD Gold Mount Battery Plate - Universal
Compact Universal Gold Mount Kit with mounting instructions and 12” wire leads - This Gold Mount is similar to the QR-GOLD above but is approximately 3/4” smaller... -
Anton Bauer 4 PowerTap Sandwich Adapter
Sandwich adapter with four PowerTap connectors allows you to power four accessories, such as lighting, wireless receivers, hard drives, onboard monitors, etc. Contains external... -
Anton Bauer Universal Compact 3-Stud Battery Plate
Universal mount with AFG Data Relay technology. -
Anton Bauer QR-SDH Gold Mount Plate
QR-SDH mounts instantly to XDCam HD (2/3”), XDCam EX, SX, Digital BetaCam, Hi-Definition and IMX cameras to accept Anton/Bauer batteries. -
Anton Bauer V-Mount to Gold-Mount Adapter for Sony F5/F55 Cine Alta Cameras
The QRC-4K-S Mounts instantly on Sony F5/F55 Cine Alta cameras to accept Anton/Bauer Logic Series® batteries. Contains 3 PowerTap® outputs for powering accessories. Also... -
Anton Bauer Gold Mount for ARRI LoCaster
Gold Mount for ARRI LoCaster Light -
Anton Bauer PowerTap Plug (Male) to 4-pin XLR Rt. Angle (Female)
A 9 inch long cable for connecting any 14V accessory with a 4p XLR Female to the PowerTap receptacle on the Gold Mount. -
Anton Bauer QR-DSR Gold Mount Battery Plate - for Sony DSR Series Camcorders
Instantly converts the Sony "wedge" or "V mount" connector to a Gold Mount system. The QR DSR allows unrestricted use of on-camera lighting, as well as... -
Anton Bauer QR-GOLD Gold Mount Battery Plate - Universal Mounting Plate
This standard full-size Universal Gold Mount Kit with mounting instructions and 12” wire can be mounted in any convenient location on a piece of equipment. Has locking... -
Anton Bauer PTE Power-Tap Male to Power-Tap Female Extension Cable - 7 ft
7 foot (2 m) cable with PowerTap Male on one end and PowerTap Female at the other. Allows the extension of any PowerTap equipped device from the Gold Mount. -
Anton Bauer CS-GBC Cine Charger Cable
Universal charging cable for use with the VCLX and VCLX/2 equipment. -
Anton Bauer QRC-BM URSA Gold-Mount Plate Male
The QRC-BM URSA Gold Mount® installs quickly on the Blackmagic Design URSA camera. It will specifically handle the URSA’s 12V input power requirement and has a single...