Power Accessories
-
Sale
Teradek Bolt Dual V-Mount Battery Plate Mount 14.4V (Open Box)
This Dual Battery Plate from Teradek allows you to sandwich Bolt Transmitters or Receivers between your camera/monitor and battery using Gold Mount or V-Mount on both... -
Teradek L Bracket Battery Adapter Plate
Power your Ace 500 transmitter or receiver using this dual mount battery plate. The plate attaches to the bottom of the transmitter or receiver using two 4-40 screws.... -
Teradek L Bracket Battery Adapter Plate
For those times when you are unable to use a PTap or 2-pin power source at the camera or monitor, there are many options for powering your Transmitter or receiver with its... -
Teradek SWIT Replac. Batt. for Sony NP-F970/F770 + Barrel Adapter to 2pin Lemo
SWIT Replac. Batt. for Panasonic VW-VGB6 + Barrel Adapter to 2pin Lemo Cable Length: 10in / 25cm Output Voltage 7.2V/5.5mm Pole-tap DC output Watt Hours 47Wh Milliamp Hours... -
Teradek Batt. Adap. plate for Canon BP-970G 7.2 volt batt. to Barrel Conn
BIT 600 Battery adapter plate for Canon BP-970G 7.2V to Barrel Connector Length: 9 In / 22 Cm -
Teradek BOLT TX / RX Batt plate for Panasonic VW-VBG6 7.2V Cable Length: 7in
This Battery Plate fits snugly on any Bolt Transmitter, Receiver, Cube 600, Cube 655 or COLR to charge/power with camera batteries. -
Teradek BOLT TX Dual V Mount Batt plate 14.4V Cable Length: 11in / 27cm
This Dual Battery Plate from Teradek allows you to sandwich Bolt Transmitters or Receivers between your camera/monitor and battery using Gold (AB) Mount or V-Mount on... -
Teradek BOLT TX Single V Mount Batt plate 14.4V Cable Length: 11in / 27cm
Single Battery Plate for Bolt Transmitters This Single (Female) Battery Plate from Teradek allows you to power your Bolt Transmitter using either Gold (AB)... -
Teradek BOLT Sidekick Dual V Mount Batt plate 14.4V Cable Length: 11in / 27cm
This Dual Battery Plate from Teradek allows you to sandwich Bolt Transmitters or Receivers between your camera/monitor and battery using Gold (AB) Mount or V-Mount on... -
Teradek SWIT Replac. Batt. for Canon BP-945/970 + Barrel Adapter to 2pin Lemo
SWIT Replac. Batt. for Canon BP-945/970 + Barrel Adapter to 2pin Lemo Cable Lenght: 10in / 25cm Output Voltage 7.2V/5.5mm Pole-tap DC output Watt Hours 47Wh Milliamp Hours 6.6Ah... -
Teradek BOLT TX / RX Batt plate for Sony B Series 7.2V Cable Length: 7in / 17cm
This Battery Plate fits snugly on any Bolt Transmitter, Receiver, Cube 600, Cube 655 or COLR to charge/power with camera batteries. -
Teradek SWIT Replac. Batt. for Panasonic VW-VGB6 + Barrel Adapter to 2pin Lemo
SWIT Replac. Batt. for Panasonic VW-VGB6 + Barrel Adapter to 2pin Lemo Cable Length: 10in / 25cm Output Voltage 7.2V/5.5mm Pole-tap DC output Watt Hours 47Wh Milliamp Hours... -
Teradek BOLT TX / RX Batt plate for Panasonic CGA-D54 7.2V Cable Length: 7in
This Battery Plate fits snugly on any Bolt Transmitter, Receiver, Cube 600, Cube 655 or COLR to charge/power with camera batteries. -
Teradek BOLT TX / RX Batt plate for Sony M Series 7.2V Cable Length: 7in / 17cm
This Battery Plate fits snugly on any Bolt Transmitter, Receiver, Cube 600, Cube 655 or COLR to charge/power with camera batteries. -
Teradek BOLT TX / RX Batt plate for JVC BN-V438U 7.2V Cable Length: 7in / 17cm
This Battery Plate fits snugly on any Bolt Transmitter, Receiver, Cube 600, Cube 655 or COLR to charge/power with camera batteries. -
Teradek SWIT Replac. Batt. for Panasonic D54 + Barrel Adapter to 2pin Lemo Cable
SWIT Replac. Batt. for Panasonic D54 + Barrel Adapter to 2pin Lemo Cable Length: 10in / 25cm Output Voltage 7.2V/5.5mm Pole-tap DC output Watt Hours 47Wh Milliamp Hours 6.6Ah... -
Teradek Sony/Canon Dual Direct Mount Battery Adapter Plate
The Sony/Canon Dual Direct Mount Battery Adapter Plate mounts directly onto any Bolt Transmitter and MOST Receivers. It is compatible with: Bolt 1000/3000 XT... -
Teradek BOLT TX / RX Batt plate for Canon BP-970 7.2V Cable Length: 7in / 17cm
This Battery Plate fits snugly on any Bolt Transmitter, Receiver, Cube 600, Cube 655 or COLR to charge/power with camera batteries. -
Teradek Bolt Dual V-Mount Battery Plate Mount 14.4V
This Dual Battery Plate from Teradek allows you to sandwich Bolt Transmitters or Receivers between your camera/monitor and battery using Gold Mount or V-Mount on both...