AVShop
-
AVShop - 2in Clamp to Pipe Adapter
The Pipe to Coupler Adapter can be used to rig pipe mounted plasma screens, projectors and speakers from overhead pipe or truss. Special versions are available with cable holes... -
AVShop.ca Headphone 3.5mm to 1/4 inch Adapter
3.5mm stereo female to 1/4 inch stereo male adapter -
AVShop Single Gang 2x Wall Plate w/ XLR Male to Female Panel Mount Cables
Don't want to solder? This wall plate is for you! Single gang 2x wall plate with 6in XLR male (plate side) to female solderless panel mount cables. If you need other... -
AVShop.ca 3.5mm to Dual RCA Splitter Cable - 6 Foot
Constructed of shielded audio cable Molded ends for added strain relief Lifetime manufacturers warranty Connectors: 1 x 3.5mm Male to 2 x RCA Male -
AVShop Stainless Steel Decora Wall plate w/ 2 XLR Female
This wall plate is made of stainless steel and comes Neutrik connectors pre-loaded with rivets for a strong bond. All plates are made to order and typically ship the same business... -
AVShop 1U Sliding Rack Tray Shelf
1U Powder Coated Black Sliding Rack Tray, with Universal Equipment Fixing Points. Recommended Load Capacity 19Kg / 41.89Lb Depth: 14.96 in / 380mm Unit Weight: 5.89lbs / 2.67Kg -
-
AVShop.ca Front Mount Antenna Kit
Antenna wires & BNC panel connectors to move antennas from wireless mic systems to the front of a rack. -
AVShop Stainless Steel Decora Wall plate w/ 1 XLR Male
This wall plate is made of stainless steel and comes Neutrik connectors pre-loaded with rivets for a strong bond. All plates are made to order and typically ship the same business... -
AVShop 1U 16 Port Neutrik D Rack Plate Panel (Front Mount)
Steel rack plate with 16 holes to mount and Neutrik style D connector. Each hole is numbered from 1 - 16 Need connectors mounted? Call our office, we can load them with any D... -
AVShop XLR Female Wall Plate - Quad
Stainless Steel Quad Dual Gang D-Type Wall Plate with 4x Neutrik XLR Females pre-mounted -
AVShop Stainless Steel Decora Wall plate w/ 1 XLR Female & 1 XLR Male
This wall plate is made of stainless steel and comes Neutrik connectors pre-loaded with rivets for a strong bond. All plates are made to order and typically ship the same business... -
-
AVShop RCA female to 1/4 inch mono male adapter
RCA female to 1/4 inch mono male adapter -
AVShop 1U Rack Shelf
1U Rack Shelf Depth: 272mm / 10.71" Recommended Load Capacity: 15 Kg/ 33.07 Lb Weight: 1.992 Kg/ 4.39 Lb -
AVShop.ca DMX Terminator 2 Pack (3 Pin XLR)
The AVShop.ca Terminator pack contains two XLR Male DMX Terminators using 3 pin Black XLR connector. These terminators use a 110Ω 1/2 watt resistor to meet the USITT DMX... -
AVShop Studio Rack - Black Finish - 16U
16U Black Studio Equipment Rack - Made in Canada! High quality laminated vertical racks are an excellent choice for studios that require economical storage systems. Features... -
AVShop Studio Rack - Black Finish - 8U
8U Black Studio Equipment Rack - Made in Canada! High quality laminated vertical racks are an excellent choice for studios that require economical storage systems. Features... -
AVShop.ca Double Gang 4 x D Neutrik Punch Wall Plate
Double Gang "J" stainless steel wall plate cover Features 4 Neutrik "D" Style punch out which can be used for any combination of the following: XLR 1/4"... -
AVShop 1U Vented Rack Shelf
1U Vented Rack Shelf Weight - 1kg / 2.2lb Depth - 270.5mm / 10.65" Material - 1.5mm / 16 gauge steel -
AVShop Wall-Mount Cable Organizer
Keep your patch cords neatly organizer with this wall mount cable holder. This can hold up to 40 cables with 1/4" diameter or less. Mount it to any accessible surface with... -
AVShop 1U Rack Drawer
1U Rack Drawer. Can be used upside down as a shelf Specifications: Material: 1.2mm / 18 gauge steel Internal size: 415mm x 368mm x 41mm / 16.34" x 14.49" x 1.61"... -
AVShop Studio Rack - Black Finish - 12U
12U Black Studio Equipment Rack - Made in Canada! High quality laminated vertical racks are an excellent choice for studios that require economical storage systems. Features... -
AVShop.ca Single Gang 2x D Neutrik Punch Wall Plate
Single Gang "J" stainless steel wall plate cover. Features 2 Neutrik "D" Style punch out which can be used for any combination of the following: XLR 1/4"...






















