HD-SDI
-
Datavideo VP-633 100m SDI Repeater (Powered)
Extend the capabilities of 3G/HD/SD-SDI cables by 100m Upto 4 SDI Repeaters (1 x VP-633 plus 3 x VP-634) can be used in one chain, allowing runs of up to 1000m with good quality... -
Kramer VM-4HDxl 1:4 HD-SDI Distribution Amplifier
The VM-4HDxl is a high-performance distribution amplifier for SDI (SMPTE 259M and SMPTE 344M), HD-SDI (SMPTE 292M), and 3G HD-SDI (SMPTE 424M) signals. The unit takes one input,... -
AJA HD5DA HD-SDI/SDI Distribution Amplifier
The HD5DA is a miniature, low cost, 1x4 HD-SDI/SDI distribution amplifier/repeater. Featuring four separately buffered HD-SDI/SDI outputs, the HD5DA provides automatic input cable... -
Kramer VM-2HDXL 1:2 3G HD-SDI Distribution Amplifier
The VM-2HDxl is a high-performance distribution amplifier for SDI (SMPTE 259M and SMPTE 344M), HD-SDI (SMPTE 292M), and 3G HD-SDI (SMPTE 424M) signals. The unit takes one input,... -
Kramer VM-10HDxl 1:10 3G HD-SDI Distribution Amplifier
The VM-10HDxl is a high-performance distribution amplifier for HD-SDI signals. The unit takes one input, provides reclocking and equalization and distributes the signal to ten... -
Kramer VM-2HD 1:2 SDI/HD-SDI Distribution Amplifier
The VM-2HD is a high-performance distribution amplifier for SDI (SMPTE 259M and SMPTE 344M) and HD-SDI (SMPTE 292M) signals. It takes one input, provides reclocking and... -
Kramer VM-22HD Dual-Mode 1:2 SD/HD-SDI Distribution Amplifier
The VM-22HD is a high-performance distribution amplifier for SDI (SMPTE 259M and SMPTE 344M), HD-SDI (SMPTE 292M) and dual link (SMPTE 372M) signals. The unit can be configured as... -
AJA 3GDA 1x6 3G/HD/SD Reclocking Distribution Amplifier
The 3GDA is a miniature, low-cost 1x6 3G HD-SDI/HD-SDI/SDI re-clocking distribution amplifier. Featuring six separately buffered SDI outputs, the 3GDA provides automatic input... -
AJA HD10DA 1x6 HD/SD Distribution Amplifier
The HD10DA is a miniature, low-cost 1x6 SD/HD (dual-rate) re-clocking distribution amplifier. Featuring six separately buffered HD-SDI outputs, the HD10DA provides automatic input... -
Datavideo VP-634 100m SDI Repeater (Unpowered)
Extend the capabilities of 3G/HD/SD-SDI cable 1 x VP-633 with 3x VP-634 SDI repeaters can each extend the range by a further 200m (high quality SDI cable) SDI... -
Kramer 1:5 3G HD−SDI Distribution Amplifier
The VM−5HDxln is a high−performance distribution amplifier for 3G HD−SDI signals. The unit takes one input, provides reclocking and equalization, and distributes... -
AJA 12GDA - 12G/6G/3G/HD/SD-SDI Distribution Amplifier
12GDA is a miniature 1x6 12G-SDI re-clocking distribution amplifier that allows facilities to save on cable runs and install times. With support for 12G-SDI for 4K/UltraHD single... -
AJA 12GM - 12G-SDI to/from SDI Muxer/DeMuxer
12GM is a compact SDI transport converter that enables 12G-SDI to Quad 3G-SDI and Quad 3G-SDI to 12G-SDI conversion. The Muxer/ DeMuxer supports 4K, UltraHD, 2K, HD and SD... -
Marshall 1x6 3G-SDI Reclocking Distribution Amplifier
The VDA-106-3GS is a compact and reliable distribution amplifier which accepts a single SDI input and provides six identical outputs. All embedded data is passed transparently.... -
AVShop 1x2 3G-SDI Splitter DA
Split and reclock your SDI signal from 1 input to 2 outputs Video Resolution: Up to 1080p@60Hz SDI Standards: SD-SDI, HD-SDI, 3G-SDI Range: 120m/390ft (HD-SDI), 200m/656ft (SD-SDI) -
Muxlab HD-SDI Balun (2-Pack)
The MuxLab 500701 – HD-SDI Balun allows a single HD-SDI signal to be transmitted up to 150ft / 45m via Cat5e/6 cable at HD resolution in a point-to-point... -
Marshall 1x4 3G-SDI Reclocking Distribution Amplifier
The VDA-104-3GS provides reclocking distribution of an SDI video input signal to four SDI outputs. The input type, whether SDI, HD SDI or 3G SDI is auto detected and displayed via... -
Muxlab 6G-SDI Extender over Cat5e/Cat6 Kit
The 6G-SDI Extender is a unique solution from Muxlab for extending SDI based cameras or other SDI sources up to 4K resolution with the added benefit of... -
Muxlab LongReach 3G-SDI Extender Kit 500ft
The LongReach 3G-SDI Extender Kit (model 500702) features extended distance transmissions up to 500ft / 150m, LED diagnostics for sync, signal detect and supports transmission of... -
Muxlab 12G-SDI 1x6 Splitter
The 12G-SDI 1×6 Splitter, 4K/60 (500718) allows one (1) 12G/6G/3G/HD/SD-SDI source to be distributed and amplified to up to six (6) 12G/6G/3G/HD/SD-SDI...