FBT SUBline 112SA Processed Active Subwoofer

About: FBT SUBline 112SA Processed Active Subwoofer

The SUBline 112SA has been completely redesigned with a bass-reflex configuration, built in birch plywood and aimed to extend the low frequency response to a wide range of FBT speaker systems.

Created with the aim to maximize SPL/SIZE ratio, they have Class D amplifiers, switch mode power supply and Digital Signal Processor with presets to match any other FBT speaker.

With IN/OUT stereo connectors, it is possible to use only one subwoofer with Left and Right speakers. The Neutrik TRUE1 Power connection negates the need for a power switch while offering a solid locking connection.

Ergonomic integrated carrying handles and tour-grade plywood cabinets allow an easy transport

• Bass-reflex design with high SPL and punch
• 320mm (12") high excursion magnet woofer with 75mm (3") voice coil
• Frequency response from 40Hz to 140Hz
• New amplifier engineered and manufactured by FBT, 700W RMS LF in Class D
• Digital Signal processor with 8 presets, 2 equalisation with 2 LPF Crossover settings, cardioid configuration
• Control panel with Stereo XLR in/outs, Volume, EQ presets, 8 steps Delay from 0.25m to 3.5m, Phase Reversal Switch 0°-180°, 3 status LED indicators
• 15 mm (0.59") birch plywood scratch resistant enclosure with internal bracing
• M20 (20mm) top mount speaker stand socket and two aluminium ergonomic FBT handles

SPECIFICATIONS

• BUILT-IN AMPLIFIER LF/HF -  700 W RMS
• BUILT-IN AMPLIFIER PEAK LF/HF -  1400 W
• FREQUENCY RESPONSE -  42Hz - 140Hz -6dB
• LOW FREQUENCY WOOFER -  12 - 2.5 coil inch
• MAXIMUM SPL CONT/PEAK -  129/133 half-space dB
• DISPERSION -  omnidirectional HxV
• INPUT IMPEDANCE -  22 Kohm
• CROSSOVER FREQUENCY -  90 or 140Hz KHz
• AC POWER REQUIREMENTS -  640 VA
• INPUT CONNECTOR -  stereo XLR with loop, HP out
• POWER CORD -  5/16.4 m/ft
• NET DIMENSION (WXHXD) -  430x447x480 / 16.9x21.5x18.9 mm/inch
• NET WEIGHT -  23./50.7 kg/lb