FBT Mitus 212FSA Processed Flyable Active Subwoofer
Model: MITUS-212FSA
About: FBT Mitus 212FSA Processed Flyable Active Subwoofer
The FBT MITUS 212FS is a 2 x 12" compact and flyable subwoofer which can extend the low frequencies of the MITUS 206L when combined together in ground-stacked or flying arrays.
The modularity of the FBT MITUS 212FS makes it extremely flexible for a wide range of applications, from a small system to an elaborate line array system consisting of up to 12 MITUS 206L cabinets along with multiple FBT MITUS 212FS subs for large concert events.
The FBT MITUS 212FS shall meet the following performance criteria: Frequency response of 50Hz to 250Hz,Frequency sensitivity of 99dB, Maximum SPL of 134dB continuous and 138dB peak, Recommended power amplifier 1000W RMS/8 Ohm. The MITUS 212FS feature Baltic birch plywood construction covered in a scratch resistant black paint with a M20 top-mounted stand adapter.
Input connectors shall be parallel wired Neutrik NL4 speakon.
- Compact vented band pass subwoofer sharing the same width and hardware suspension of the MITUS 206LA
- 320 mm (2 x 12’’) B&C neodymium magnet high excursion subwoofers with 75 mm (3’’) voice coils
- Frequency Response from 45Hz to 120Hz
- Class D amplifier delivering 1200WRMS
- Switch mode power supply
- DSP with 8 presets, cardioid and infra configurations, delay
- Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, ground-lift
- 15 mm (5/8’’) birch plywood enclosure, scratch resistant black paint
- Low frequency extension cabinet for the MITUS 206LA line array for flying or ground stacked configurations.
- M20 top mount stand socket
SPECIFICATIONS
- CONFIGURATION - 1 way
- BUILT-IN AMPLIFIER LF/HF - 1200 W RMS
- BUILT-IN AMPLIFIER PEAK LF/HF - 2400 W
- FREQUENCY RESPONSE - 45Hz-120Hz -6dB
- LOW FREQUENCY WOOFER - 2x12 - 3 coil - neodymium inch
- MAXIMUM SPL CONT/PEAK - 134/138 half-space dB
- DISPERSION - omnidirectional HxV
- INPUT IMPEDANCE - 22 Kohm
- CROSSOVER FREQUENCY - preset dependant KHz
- AC POWER REQUIREMENTS - 640 VA
- INPUT CONNECTOR - XLR with loop
- POWER CORD - 5/16.4 m/ft
- NET DIMENSION (WXHXD) - 574x420x660 mm / 22.6x16.5x26 inch
- NET WEIGHT - 36.5 kg / 80.5 lb
Reviews: FBT Mitus 212FSA Processed Flyable Active Subwoofer
Warranty: FBT Mitus 212FSA Processed Flyable Active Subwoofer
AVShop.ca Warranty:
30 Days
Manufacturer's Warranty:
2 Year
Manufacturer's Warranty will cover parts, labour and return shipping back to you once repaired. Shipping into the service centre is not covered
