Dynacord MXE5 Matrix Mix Engine

About: Dynacord MXE5 Matrix Mix Engine

The MXE5 is the first member of the MXE matrix mix engine series. The performance audio matrix with 12 analog mic/line inputs, 8 line outputs and 24x24 Dante channels provides configurable matrix blocks with up to 3840 cross-points and up to 256 internal signal-paths. The configuration allows the choice between a fixed or a free DSP configuration. At the same time, the MXE5 serves as a control center and communications hub for system devices and IP-based peripherals providing comprehensive supervision of system-wide commands.

Thanks to SONICUE, the MXE5 can be assigned with personalization features, rights management and GPIO configuration. The optional TPC-1 touch panel controller has a low-profile form factor and features a 5.7” HD display.

Features

• 24 x 24 zone/matrix mixer
• 12 mic/line inputs and eight line outputs
• 48 / 96 kHz sampling rates
• System manager / OCA controller / FIR-Drive controller
• Outstanding SNR, THD and latency specifications
• Professional input and output processing
• Complete SONICUE sound system software integration
• Third-Party plug-ins for Crestron and Q-SYS
• Optional TPC-1 touch panel controller
• Optional WPN1 networked wall panel controller
• SONICUE Control iOS app

Delivering the highest audio quality

MXE5 benefits from advanced DSP and latest technology, providing outstanding audio quality. This is ensured by an internal sampling rate of 96 kHz (switchable to 48 kHz), more than 118dB of dynamic range and the industry’s lowest audio latency of less than 0.22 ms.

Ready for a wide range of applications

MXE5 is designed for consultants, specifiers, system integrators and production companies who demand the highest-quality audio and uncompromising live performance sound.

Built on comprehensive software

MXE5 integrates seamlessly with Dynacord’s SONICUE Sound System Software, one of the most powerful software interfaces in the industry. It offers comprehensive control and easy, intuitive operation. SONICUE allows the design of customized control panels running on TPC-1, WPN1, or network computers utilizing the SONICUE Control app. MXE5 also features plug-ins for Crestron and Q-SYS systems.

Made for mixing and routing

MXE5 offers a variety of functions beyond being a powerful DSP processor and cross point matrix. MXE’s Task Engine is a freely programmable logic engine that transforms it into a sophisticated system manager and an OCA controller with comprehensive monitoring and supervision capabilities.

Specifications

• Matrix size -  36 x 32
• Sampling rate -  48 kHz /96 kHz
• Dante in/out -  24/24
• Analog inputs -  12 mic/line
• Analog outputs -  8
• Max. input/output level -  + 22 dBu
• Signal to noise ratio (inputs/outputs) -  > 118 dB
• Signal processing -  32/40-bit floating point
• THD+N -  < 0.002 %
• Latency (analog in/out, 48 kHz / 96 kHz) -  < 0.45 ms / < 0.22 ms
• Control ports -  8 GPIO
• Dimensions (WxHxD) -  19.02 x 1.71 x 18.54 Inch / 483 x 43.5 x 471 mm (19", 1 RU)
• Weight -  13.2 lbs (6.0 kg)

What's Included

• 1x MXE5 DSP Matrix Mix Engine
• 10x 6-pin Euroblock-type connector, inputs/outputs
• 1x 15-pin Euroblock-type connector, control port/GPIO
• 1x AC power cable
• Installation manual
• Important safety instructions booklet